Abstract:Textile Research Journal, Ahead of Print. The stable control of warp tension in a carbon fiber three-dimensional (3D) loom plays a decisive role in the performance of 3D woven fabrics. Aiming at nonlinear, time-varying, and strongly coupled characteristics of the warp tension system, the stable control of warp tension is carried out based on fixed-time theory and sliding mode theory. First, the mathematical model of the tension system is established by taking into account the influence of the beating-up mechanism and shedding mechanism as the unmodeled part. Then, according to the characteristics that only warp tension in the system can be measured, the unmodeled part and external disturbance are regarded as a lumped disturbance. After analysis, a fixed-time extended state observer (FESO) is proposed to observe the lumped disturbance and unmeasured system state. Second, relying on the observed results, a novel logarithmic fixed-time fast convergent sliding surface (LF-FCSS) is constructed. Subsequently, based on this sliding surface, a non-singular sliding mode controller (NS-SMC) is designed, which allows the tension tracking error to converge rapidly while weakening the buffeting phenomenon and eliminating the singularity of the controller. Stability proof of the closed-loop system is given theoretically, which ensures that warp tension can be controlled stably. Finally, simulation models are built in Simulink to verify the fast convergence performance of the proposed sliding surface and the effectiveness of the non-singular controller. The superiority of the proposed control strategy is proved by comparing it with the existing methods of sliding mode control in the literature.

Control Strategy for Smooth Wire Sending and Constant Tension in Multiwire Slicer

Research on the Winding/Unwinding Control System Based on Fuzzy Control Theory

The Research of the Tension Control System of Optical Fiber Coil Winding Machine

Tension and velocity control system for steel wire winch based on industrial computer

Robust Control of High Speed High Precision Linear Motion System

Modeling of Tension Control System with Passive Dancer Roll for Automated Fiber Placement

Multivariable Constrained Generalized Predictive Control Strategy for the FCCU Main Fractionator

A High-Precision Constant Wire Tension Control System for Improving Workpiece Surface Quality and Geometric Accuracy in WEDM

Fiber Tension Prediction and Control Methods in Automated Fiber Placement

Warp tension control system based on fuzzy-PI parallel control

Design of DSP-based Constant-tension Wire Winding System

Analysis and design of wire winding tension control system based on genetic algorithm and fuzzy PID

Optimal Tension Control of Micro Wire Electrode

Control and Dynamic Simulation of Wire-Driven Precise Spray Robotic Arm

Fuzzy-precise combined control system

Experiment Comparative Analysis of Feed Rate with Velocity Control in Cutting Mono Crystalline Silicon Using a Diamond Wire Saw

An adaptive force and posture control strategy for automated wiring terminal assembly

Laser-Based Thickness Control In A Double-Side Polishing System For Silicon Wafers

Thermo-mechanical analysis and optimal tension control of micro wire electrode

Digital control system of tension during the formation of flexible-oriented three-dimensional composite preforms

Control strategy for single-layer warp tension in a carbon fiber 3D loom based on fixed-time theory and sliding mode theory