Abstract:The proportional-integrator (PI) controller in the synchronous reference frame (dq-frame) and the proportional-resonant (PR) controller in the stationary reference frame (αβ-frame) are two typical linear current control schemes for three-phase voltage source converters. It is generally believed that the plant model is mathematically uncoupled in αβ-frame. Hence, the decoupling control required to attenuate the axis cross-coupling effect in dq-frame is regarded as not necessary in αβ-frame. However, detailed analysis with complex coefficient transfer functions reveals differences in the control performance between the fully decoupled PI control scheme in dq-frame and the PR control scheme in αβ-frame. When regulating sinusoidal currents in αβ-frame, the α-axis and β-axis current references are strongly correlated with each other, which implies a cross-coupling effect equivalent to that of dq-frame. In analogy to the dq-frame decoupling control, cross-coupling terms can be employed together with the conventional PR control scheme. It can bring the benefit of improving the transient response of current tracking and reducing the sensitivity of the resonant controller to frequency variation, especially for low-switching-frequency applications with limited current control bandwidth. Furthermore, the cross-coupling terms based on reference current feed-forward are proposed to improve the performance of both positive- and negative-sequence current control. Experimental results are shown to validate the analysis and the performance of the proposed control scheme.

Effect of Decoupling Terms on the Performance of Pr Current Controllers Implemented in Stationary Reference Frame

Implementation of Cross-Coupling Terms in Proportional-Resonant Current Control Schemes for Improving Current Tracking Performance

A Decoupling Method Based On Reference Current Feedforward For Dq-Frame Pi Current Control Of Grid-Connected Voltage Source Converters

Decoupled Vector Control Scheme for Dual-Armature Flux-Switching Permanent Magnet Machines

Cross-coupling and Decoupling Techniques in the Current Control of Grid-Connected Voltage Source Converter

Power Coupling Analysis and Improved Decoupling Control for the VSC Connected to a Weak AC Grid

DQ Current Control of Voltage Source Converters With a Decoupling Method Based on Preprocessed Reference Current Feed-forward

Research on Voltage Decoupling Control of Vector Control for Permanent Magnet Synchronous Motor

A New Control Approach for Active Power Quality Conditioner in Synchronous Rotating Frame

Modeling, Analysis, and Design of Resonant Proportional Stationary Frame Current Controller for Grid-Tide Three Phase Controller

D-Q Frame Impedance Measurement and Small Signal Stability Improvement in a 3-ϕ System with Constant Power Loads by an Active Control Method

A Novel CCSC for Circulating Current Suppression in Modular Multilevel Converters

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Modeling and Stability Analysis of Grid-Connected VSCs on Interactions Between ICFF Decoupling Control and PLL

Performance Evaluation of Two High Precision Distributed Series Compensator Control

An Improved Power-Decoupling Scheme with Grid Inductor Phase-Shift Modification for Single-Phase Converter

Fast-transient repetitive controller based current control strategy for a cascaded DSTATCOM

A Simple Model Predictive Instantaneous Current Control for Single-Phase PWM Converters in Stationary Reference Frame

A Novel Decoupling Control Approach for Improving Dynamic Performance and Stability of Multiple Grid-Connected Converters

Decoupled Control for Planar Motor Based on Self-Adaptive Correction for Current Distribution Coefficient

Analysis and comparison of resonant-based current controllers implemented in stationary reference frame: A complex pole-zero placement perspective