Abstract:The superimposed influences of the blade rows in a multistage compressor are important because different matches of upstream and downstream blades can result in significant differences in the stator wake oscillation. Numerical investigation of the axial stator wake oscillation, which is affected upstream by the axial rotor and downstream by the radial rotor, was performed in an axial-radial combined compressor. Many configurations with different blade numbers and locations, which influence axial stator wake oscillation were investigated. When rotors have equal blade numbers, the axial stator wake oscillates periodically versus time within time T (moving blade passing 1/3 revolution). In contrast, stator wake oscillates irregularly within T when rotors have different blade numbers. A model-split subtraction method is presented in order to separate the influences of the individual blade rows on the wake oscillation of the axial stator. Analysis from the rotor-stator configuration showed that the unsteady flow angle fluctuation response is caused by the upstream rotor. For the rotor-stator-rotor configuration, the unsteady flow angle fluctuations are influenced by up- and downstream blade rows. With the model-split subtraction method, the up- and downstream influences on the flow angle fluctuation could be clearly separated and quantified. Low amplitudes could be observed when the influences from up- and downstream moving rows were superimposed with the "positive peak- negative peak" type wave. Clocking investigations were carried out to change the relative superimposed phase of influences from the surrounding blade rows in order to modulate the amplitudes of the axial stator wake oscillation. However, the amplitudes did not reach the maximum when they were superimposed with "positive peak-positive peak" type wave due to the impact of the interaction between the two moving blade rows.

APPLICATION OF BOWED AND SWEPT ROTORS IN A TRANSONIC AXIAL COMPRESSOR

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Investigation on the Aerodynamic Performance and Flow Mechanism of Transonic Ultra-Highly Loaded Tandem-Rotor Stage

Passage shock wave/boundary layer interaction control for transonic compressors using bumps

Numerical investigation of lfow ifeld for transonic centrifugal compressor with blade leading edge forward sweep

Investigation on Aerodynamic Performance of a Centrifugal Compressor with Leaned and Bowed 3D Blades

Using tandem blades to break loading limit of highly loaded axial compressors

Aerodynamic Redesign of A 5-Stage Axial Compressor by Restagger and Bow

A throughflow-based optimization method for multi-stage axial compressor

Optimization of cantilevered stators in an industrial multistage compressor to improve efficiency

Investigation of Endwall Treatment and Shock Control in a Five-Stage Axial Compressor

Aerodynamic Analysis and Three-Dimensional Redesign of a Multi-Stage Axial Flow Compressor

Optimal Design and Analysis of a High-Load Supersonic Compressor Based on a Surrogate Model

Mechanisms of Sweep on the Performance of Transonic Centrifugal Compressor Impellers

Numerical Investigation of the Superimposed Effects on Stator Wake Oscillation in an Axial-Radial Combined Compressor

Three-Dimensional Aerodynamic Optimization of a Multi-Stage Axial Compressor

Bowed Stators: An Example of CFD Applied to Improve Multistage Compressor Efficiency

Investigation of Positive Bowed Stator on Off-design Characteristics in a Multistage Compressor

A Novel Airfoil Design Method and its Application to the Optimization Design of a 3-Stage Transonic Compressor