Abstract:The vector control of the permanent magnet synchronous motor (PMSM) is affected by cross-coupling, output delay, parameter mismatch, and other factors; thus, resulting in its poor steady-state and insufficient dynamic performance. To address these problems, the design proposed in this study adopts a model predictive current control strategy. In the traditional model predictive control, the absolute value of the difference between the predicted output current of the inverter and the reference current is used as the cost function instead of the minimum value of the valence function, i.e., the optimal solution of the system, and the best switching state is outputted. The design proposed in this study adopts the dual-vector model to predict the current control. Firstly, the reference voltage vector was predicted on basis of the deadbeat idea, which reduced the calculation burden of processor. Next, in order to further improve the stability of the system, a two-vectors duty cycle calculation method was introduced. Then, simplifies the selection range of the two voltage vectors. While ensuring the accuracy of the voltage vector, the control is reduced. Reduce the amount of calculation in the system, thereby improving its robustness. Finally, based on the principle of current vector tracking error minimization, the duration of the selected voltage vector was determined. Last but not the least, the control strategy is applied to the MTPA control to increase the operating efficiency of the control motor. The improved control strategy can effectively reduce the torque ripple and improve the dynamic and steady-state performance of the system. Simulation results verify the feasibility and effectiveness of the proposed control algorithm.

Study on Multi-vector Control Technique for Dual Three-phase Permanent Magnet Synchronous Motor

Research on Voltage Decoupling Control of Vector Control for Permanent Magnet Synchronous Motor

Synthetic Vectors-Based Predictive Control of Dual Three-Phase PMSMs for Current Harmonics Mitigation Considering Average Deception Effect

Dual Closed-Loop Control Strategy on Harmonic Plane for Multiphase Induction Motor with Harmonic Injection Based on Air-Gap Flux Orientation Control

Modeling and Realization of Multiphase Permanent Magnet Synchronous Motor Variable Speed System

Techniques to restrain harmonics of dual three-phase permanent magnet synchronous motor

The Technology Study of Vector Control System for Permanent Magnet Synchronous Motor

Analysis of zero state vector distribution based on space vector PWM techniques for dual Y shift 30 degree PMSM

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

Research on SVPWM control algorithm based on dual three-phase permanent magnet synchronous motor

Investigation of Permanent Magnet Synchronous Motor System Used in Electric Vehicles Based on Space Vector Modulation

Vector Control System of Permanent Magnet Synchronous Motor

Dual Three-Phase Permanent Magnet Synchronous Machines Vector Control Based on Triple Rotating Reference Frame

Efficient Predictive Control for Dual Three-Phase PMSM Drive With Vector Transformation

Multi-Virtual-Vector Model Predictive Current Control for Dual Three-Phase PMSM

Hybrid Svpwm Technique for Reduced Torque Ripple in Permanent Magnet Synchronous Motor

An I/f Control Method With Closed-loop Regulation of Current Vector for Surface Permanent Magnet Synchronous Motor Drives

MTPA control of permanent magnet synchronous motor based on dual-vector model predictive control

Non-sinusoidal Output Voltage for Multiphase Variable Speed Drives with Space Vector PWM

Comparative Study of Field-Oriented Control in Different Coordinate Systems for DTP-PMSM

Multi-dimensional vector control for six-phase interior permanent magnet synchronous motor sensorless drive system