Abstract:Epoxy (EP) composites with comprehensive good processability, low coefficient of thermal expansion (CTE), and high thermal conductivity, but electrical insulation properties are largely demanded in the higher power electric devices. However, micro-fillers have a positive effect on maintaining the good flowability of epoxy composites, while do not bring high thermal conductivity enhancement per unit mass. While nano-fillers with high specific surfaces offer very promising opportunities for heat-conducting network construction, but the nano-fillers dispersion is difficult to control and will cause increased viscosity and processing difficulties. Herein, we expect that the addition of small amounts of silver nanowires (AgNWs) at 0.5 vol.% into the EP/S-Al2O3 composites could largely enhance the thermal conductivity but not sacrifice their processability. Owing to the bridging effects of rigid nanowires between the main spherical particles, the thermal conductivity of the micro-nano EP/AgNWs/S-Al2O3 composites with 40 vol.% S-Al2O3 and 0.5 vol.% AgNWs exhibits a 106.5% increment comparing to that without AgNWs. The limitation of both single micro or nano-sized thermal conductive fillers can be offset by the micro-nano filler network structure. The best combination properties of the EP/AgNWs/S-Al2O3 composites can reach the high thermal conductivity (1.602 W/m·K), low viscosity (55.6 Pa.s), low CTE (37.1 ppm/°C), and high glass transition temperature (Tg, 152.1°C). These results demonstrate that adding multiscale fillers into epoxy composites may solve the tradeoff between thermal conductivity and processability performances and fit the applications in high-power density electronic devices.

Research Progress of Flexible Nanocomposites with High Thermal Conductivity

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Research progress of high thermally conductive polymer nano-composites

Research progress of high thermal conductive polymer nano-composites

Effect of hybrid nanofillers on thermal conductivity of composite phase change materials

Progress in Thermally Conductive Polymer Based Composites

Research Status of Thermally Conductive but Electrically Insulating Polymer Nanocomposites

Progress of high thermal conductivity and low expansion composite silicone rubber and thermally conductive filler

Nanocarbon‐based Hybrid Fillers in Thermally Conductive Polymer Composites: A Review

Recent Advances in Improvement of Thermal Conductivity of Epoxy-Based Nanocomposites Through Addition of Fillers

Research progress of filled-type thermal conductive insulating polymer matrix composites

Research Progresses in Thermally Conductive Polymeric Composites with Metal Particles

Effect of Filler Loading, Geometry, Dispersion and Temperature on Thermal Conductivity of Polymer Nanocomposites

Recent advances in thermal-conductive insulating polymer composites with various fillers

Progress in Thermal Conductive Polymer Composites

Application-Driven High-Thermal-Conductivity Polymer Nanocomposites.

Recent Progress on Thermal Conductive and Electrical Insulating Polymer Composites

Optimization of Hybrid Filler in Thermally Conductive Composite Formation

Novel micro-nano epoxy composites for electronic packaging application: Balance of thermal conductivity and processability

Research Progress in Carbon-based Functional Materials with High Thermal Conductivity

Beyond homogeneous dispersion: oriented conductive fillers for high<i>κ</i>nanocomposites