Abstract:With the rapid development of 5G technology, acoustic wave filters with large bandwidths are urgently required to deal with the explosive increase in data traffic. Recently, there is extensive attention paid to shear-horizontal (SH) surface acoustic wave (SAW) resonators based on lithium niobate (LiNbO3) substrates, thanks to its large effective coupling coefficient (k(eff)(2)). However, because of the bulk acoustic wave (BAW) energy radiation into the LiNbO3 substrate, it is very challenging to obtain a high quality factor (Q) for SH-SAW resonators. In this study, a 30 degrees YX-LiNbO3/SiO2/Si SAW resonator with the SH mode is proposed to achieve a large coupling and a high Q simultaneously. By bonding a LiNbO3 thin film onto a thermally oxidized Si(100) substrate, the velocity mismatch between the piezoelectric layer and the SiO2/Si substrate could significantly reduce the BAW energy leakage. Finite element method simulation is employed to optimize the cut angle of the LiNbO3 film and the thickness of each layer. The fabricated SH-SAW resonators with a resonant frequency of 924 MHz yield a k(eff)(2) of 24.8% and a maximum of Bode-Q (Bode-Q(max)) of 1107. In comparison with the previously reported same-type SAW resonators, a higher Bode-Q(max) is demonstrated in this work when their k(eff)(2) is larger than 20%, providing a potential solution to enable wideband tunable filters in the 5G communication system. Published under an exclusive license by AIP Publishing.

Comparative Study of Acoustic Wave Devices Using Thin Piezoelectric Plates in the 3–5-Ghz Range

Applicability Investigation of SAW Devices in the 3 to 5 GHz Range

Comparative Study of SAW Temperature Sensor Based on Different Piezoelectric Materials and Crystal Cuts for Passive Wireless Measurement

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

A High Velocity and Wideband SAW on a Thin LiNbO3 Plate Bonded on a Si Substrate in the SHF Range

Three-Dimensional Finite Element Analysis and Characterization of Quasi-Surface Acoustic Wave Resonators

3.5 GHz longitudinal leaky surface acoustic wave resonator using a multilayered waveguide structure for high acoustic energy confinement

Single Crystal Bulk Acoustic Resonator for 5 GHz and High-Power Applications

Theoretical Investigation of Acoustic Wave Devices Based on Different Piezoelectric Films Deposited on Silicon Carbide

Spurious-Free Shear-horizontal SAW Resonators Using LiTaO3/SiO2/Si Substrate

A 5.5 GHz S3 Mode Plate Acoustic Wave Resonator Using Lithium Tantalate Thin Film

Spurious-Free Shear-horizontal SAW Resonators Using LiTaO<inf>3</inf>/SiO<inf>2</inf>/Si Substrate

High-Performance Surface Acoustic Wave Devices Using LiNbO 3 /SiO 2 /SiC Multilayered Substrates

Requirements for Piezoelectric Thin Film Applications to Radio Frequency Acoustic Wave Devices

High-Performance Acoustic Wave Devices on LiTaO$_{3}$/SiC Hetero-Substrates

High-Performance Surface Acoustic Wave Devices Using LiNbO3/SiO2/SiC Multilayered Substrates

Monolithic 1–6-Ghz Multiband Acoustic Filters Using SH-SAW and LLSAW on LiNbO$_{3}$/SiO$_{2}$/SiC Platform

Surface Acoustic Wave Devices Based on High Quality Temperature-Compensated Substrates

Combination of Tetragonal Crystals With LiTaO3 Thin Plate for Transverse Resonance Suppression of Surface Acoustic Wave Devices

Large Coupling and Spurious-Free SH 0 Plate Acoustic Wave Resonators Using LiNbO 3 Thin Film

High-performance SH-SAW resonator using optimized 30 degrees YX-LiNbO3/SiO2/Si