Abstract:Objective: As most existing medical pulse oximeters conduct the monitoring of blood oxygen saturation (SpO2) at fingertips, the compliance of subjects cannot be ensured. In this paper, we aim to design an SpO2 monitoring system on the wrist, where the thick cortex and unclear vessels make the original collected signals affected by complex noises. Methods: We render an adaptive low-power wrist SpO2 monitoring system, where a multi-filtering scheme based on thresholding, Gaussian filtering and Butterworth filtering is proposed to process the original collected signals. Besides the wrist-worn monitoring terminal, a database is also established on the server for data display and management. The resulting SpO2 values were compared to the professional medical pulse oximeters Yuwell YX306 and Philips DB18. Results: With the multi-filtering scheme, the measurement results of the proposed system matched the medical pulse oximeters well, with average relative errors of 0.6175% compared to the YX306 and 0.555% compared to the DB18 in 400 SpO2 measurements, which were far lower than the tolerance of commercial devices under the ISO80601-2-61 standard. The power consumption of the proposed system was only 2 mW on average. Conclusion: The multi-filtering scheme can remove most noises in the original collected signals, and the proposed system gets superior performances on SpO2 measurement accuracy and power consumption. Significance: The proposed system, designed using the multi-filtering scheme, is able to conduct a stable and effective wrist SpO2 monitoring, with the subject's compliance ensured. It achieves low power consumption and can be used for long-time continuous SpO2 monitoring.

A monitoring method of blood-oxygen saturation using reflection type photoelectric sensor

Design of Non-invasive Oximeter

Non-invasive method and experimental study for measurement of oxygen saturation rate in wide range

[Study on a Non-Invasive Wide-Range Blood Oxygen Saturation Detecting Method and Its Instrument Design].

Dynamic Blood Oxygen Saturation Monitoring Based on a New IPPG Detecting Device

Design of Non-invasive Pulse Oximetry Surveillance System

[Statistical report on mycological studies in onchomycosis and tinea pedis in the GDR. (1967-1969)].

Noncontact Monitoring of Blood Oxygen Saturation Using Camera and Dual-Wavelength Imaging System.

Adaptive low-power wrist SpO2 monitoring system design using a multi-filtering scheme

Initial test cutoff selection based on regression analysis of initial test apparent analyte result vs GC/MS test analyte result--evaluation of two radioimmunoassay kits' test data.

A Self-Calibrated Single Wavelength Biosensor for Measuring Oxygen Saturation

Flexible Photoplethysmographic Sensing Devices for Intelligent Medical Treatment

Dynamic monitoring of blood oxygen saturation in vivo using double-ring photoacoustic sensor

[Wireless Pulse Wave Monitoring System Based on Reflective Flexible Probe and AFE4490]

Flexible wearable biosensor for physiological parameters monitoring during exercising

A Study of Data Processing Methods for Non‐Contact Multispectral Method of Blood Oxygen Saturation

Development of a pulse oximeter robust to measurement errors, with the ability to estimate heartrate and transmit data to smartphones

New Real-time Method for Pulse Wave Process and Pulse Rate Estimation in Dynamic Measurement of Pulse Oxygen Saturation

Pulse oximetry optical sensor using oxygen-bound haemoglobin

Design of Internet of Things (IoT) and Android Based Low Cost Health Monitoring Embedded System Wearable Sensor for Measuring SpO2, Heart Rate and Body Temperature Simultaneously

[Development of a Three-Wavelength Brain Tissue Oxygen Monitoring System Based on Near Infrared Spectrum]