Abstract:Near-infrared spectroscopy is often used for the non-invasive detection of composition in the human body, such as that of blood glucose and haemoglobin, due to its high penetration depth into tissues. Although it is feasible to position the optical probe precisely, contact situation between probe and human tissues is a difficult problem to determine because of physiological tremor and mechanical performance of bio-soft tissue. Here, we proposed a novel estimation method for the situation between the optical probe and tissue surfaces based on the dynamic auto-correlation matrix of two-dimensional correlation spectroscopy (2DCOS) and radar chart. The diffuse reflectance spectra from the left palm of 4 healthy volunteers were collected while the optical probe gradually approached and pressed bio-tissues with a custom-design controlling device. 2DCOS in the wavelength with lower absorption (1000-1400 nm) was calculated under the perturbation of relative-distance and contact pressure between the optical probe and tissue surface. The synchronous 2DCOS showed that the surface reflection and diffuse reflectance were greatly affected by the contact conditions in 1100 nm, 1220 nm, and 1300 nm. Then the dynamic auto-correlation matrix of 2DCOS was established for the adjacent spectra, and the significant difference wavelengths were used to build radar charts to determine the critical contact situation visually. Results showed that the maximum variations of dynamic auto-correlation matrix appeared at near 1300 nm, and the relative distance between the probe and tissue corresponding to the critical contact state can be easily observed with radar charts with 0.25 mm uncertainty, which was consistent with the self-feeling of each volunteer. So this method can be applied to exactly determine the optimal measurement status for the non-invasive body composition detection in vivo. It is important for the design of human-machine interface and the accuracy improvement of body composition measurements.

[Study on a Non-Invasive Wide-Range Blood Oxygen Saturation Detecting Method and Its Instrument Design].

Non-invasive method and experimental study for measurement of oxygen saturation rate in wide range

Design of Non-invasive Oximeter

Noncontact Monitoring of Blood Oxygen Saturation Using Camera and Dual-Wavelength Imaging System.

Design of Non-invasive Pulse Oximetry Surveillance System

Dynamic Blood Oxygen Saturation Monitoring Based on a New IPPG Detecting Device

A Study of Data Processing Methods for Non‐Contact Multispectral Method of Blood Oxygen Saturation

Non-invasive Detection of Biological Tissue Oxygenation Using Near Infrared Spectroscopy

Adaptive low-power wrist SpO2 monitoring system design using a multi-filtering scheme

[Optimally Designing the Probe of the Near Infrared Oximeter to Detect Human Tissue Oxygen Saturation Non-Invasively].

Pulse oximetry optical sensor using oxygen-bound haemoglobin

Research on the Best Measurement Situation Between Optical Probe and Tissue Surfaces in Non-Invasive Detection.

SleepSense: A Noncontact and Cost-Effective Sleep Monitoring System

[Development of a Three-Wavelength Brain Tissue Oxygen Monitoring System Based on Near Infrared Spectrum]

[Design of Pulse and Respiratory Signals Detection System]

Using Contactless Facial Image Recognition Technology to Detect Blood Oxygen Saturation

Non-invasive Monitoring of Human Cerebral Oxygen Saturation by Near Infrared Spectroscopy: Instrumentation, Calibration and Application in Cardiopulmonary Bypass

Design of Non-Invasive Detector for Hemoglobin Concentration Based on TMS320F2812DSP

Non-Invasively Monitoring Human Tissue Oxygenation Using Near Infrared Spectroscopy: Independent Innovations

Non-Contact Measurement of Blood Oxygen Saturation Using Facial Video Without Reference Values

Design of Internet of Things (IoT) and Android Based Low Cost Health Monitoring Embedded System Wearable Sensor for Measuring SpO2, Heart Rate and Body Temperature Simultaneously