Abstract:The electromechanical co-simulation method was used to simulate and analyze the 6-DOF (degrees of freedom) positioning and micro-vibration isolation functions of the platform in order to analyze the working performances of a contactless positioning and vibration isolation platform which works at space microgravity environment. The working principle of the contactless positioning and vibration isolation platform was introduced. The exciting unit, position measuring unit and acceleration measuring unit of the platform were made up by contactless biaxial actuators, biaxial position sensitive detectors and uniaxial accelerometers according to space symmetry layout scheme. The controller of the platform was designed based on position and acceleration feedback. Then the mechanical system simulation model and the closed-loop control system simulation model based on position and acceleration feedback was established by ADAMS and MATLAB/Simulink, respectively, which together set up the electromechanical co-simulation model of the platform. The positioning and vibration isolation performances of the platform were simulated by the co-simulation model. Results show that the 6-DOF displacement and angular displacement control errors of the platform are less than 10 μm and 2×10−5 rad respectively under small range positioning mode. The suppression efficiencies of the platform for 6-DOF direct sinusoidal disturbances with frequency range of 0.01−1 Hz and 1−100 Hz are 39−73 dB and 19−73 dB, respectively. The relative displacements between the floater and the stator are less than 1 mm during vibration isolation control process under vibration isolation mode.

Dynamic Analysis and Simulation of a 6-Degree of Freedom Parallel Earthquake Simulator

Study On A New Kind Of 6-Degree Of Freedom Parallel Earthquake Simulator

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Kinetic Characteristics Analysis of an 8-PSS Redundant Input Earthquake Simulator

Dynamic Formulation and Performance Evaluation of the 6-D.o.f. Parallel Structure Seismic Simulator

6-DOF Parallel Electric Experimental Teaching Platform

Research on Full Reachable Workspace of the Parallel 6-DOF Platform

Static Stiffness Analysis of a Kind of Earthquake Simulator with Redundant Inputs

Dynamic Modeling and Robust Control in Task Space of 4-DOF Parallel Electric Platform with 4TPS-1PS Structure

Non-Inertial Dynamic Analysis of 3-SPS/U Parallel Platform by Screw Theory and Kane’s Method

Dynamics Modeling of a Six-degree-of-freedom Parallel Platform and its Analysis

Mechanism and Motion Control System Design of 6-Dof Parallel Earthquake Simulator

A Newton-Euler Formulation for the Inverse Dynamics of the 6-PSS Parallel Mechanism

Dynamic Analysis of a 6-DOF Inverted Stewart Platform

Modeling of AMESim Based Hydraulic Parallel Mechanism and Simulation of Its Coupling Characteristics

Development of 6-dof parallel seismic simulator with novel redundant actuation

Modeling And Simulation Of A Six Degree-Of-Freedom Motion Simulator Using Bond Graph

Design and simulation of a desk-size parallel kinematic machine for simulation of seismic events

Dynamic Modeling of a 6-Degree-of-freedom Stewart Platform Driven by a Permanent Magnet Synchronous Motor

Washout Motion Simulation in 6-DOF Parallel Platform Based on Vortex

Dynamic Modeling and Active Vibration Isolation of a Noncontact 6-DOF Lorentz Platform Based on the Exponential Convergence Disturbance Observer