Abstract:Seismic isolation has become a widely accepted method for the protection of structures and nonstructural components. However, this control strategy is unfavorable against near-fault earthquakes, particularly those featuring velocity-pulse effects. Excessive isolation displacements and accelerations can occur during such earthquakes, resulting in amplified responses of the superstructure. To resolve this problem, this study develops a prototype of the eccentric rolling isolation system consisting of one platform eccentrically pin-connected to four circular rollers. The eccentric pin connection yields a nonlinear restoring force of the proposed system and results in displacement-dependent resonances, and the inherent mechanical friction also yields an energy dissipation capability of the system. As the magnitude of ground excitation increases, the prototype system generates a lower resonant frequency away from the dominant frequencies of earthquakes. This behavior is experimentally investigated and verified for mechanical behavior and seismic performance. In the experiment, sinusoidal, far-field, and near-fault ground motions are considered in shaking table testing. Some parameters, such as the eccentricity, roller size, and inertial force, are also experimentally investigated. As found in the experimental result, the feasibility of the prototype system is successfully verified. Meanwhile, the comparable simulation results further validate the mathematical model of the prototype system. Consequently, the eccentric rolling isolation system has demonstrated isolation effectiveness against far-field ground motions and has good potential to perform better than a linear system under near-fault ground motions.

Static Stiffness Analysis of a Kind of Earthquake Simulator with Redundant Inputs

Control strategy in earthquake simulation test based on elastic payload

Kinetic Characteristics Analysis of an 8-PSS Redundant Input Earthquake Simulator

Study On A New Kind Of 6-Degree Of Freedom Parallel Earthquake Simulator

Earthquake simulation control of a specimen in elastoplastic stage

Dynamic Analysis and Simulation of a 6-Degree of Freedom Parallel Earthquake Simulator

Mechanism and Motion Control System Design of 6-Dof Parallel Earthquake Simulator

Remote Hybrid Testing of Asymmetric Structures under Earthquake Excitation

Study on remote collaborative pseudo-dynamic tests of multi-story frames

Development of 6-dof parallel seismic simulator with novel redundant actuation

Statics and Kinematis Analysis of PSS-type Redundant Input Parallel Mechanism

Modeling of AMESim Based Hydraulic Parallel Mechanism and Simulation of Its Coupling Characteristics

Analysis model for long-span isolated structure subjected to multi-support earthquake excitations

Analytical and numerical investigations of base isolation system with negative stiffness devices

Error Analysis of a Parallel Simulator with Orthogonal Chains and Redundant Actuators

Total Errol Parametric Analysis and Screening for Earthquake Simalator Based on Monte-Carlo

Dynamic Simulation Experimental Method Study About Rc Structure'S Nonlinear Performance In Earthquake Simulation Tests

Study on Control Scheme of Statically Indeterminate on Seismic Simulator and Compensation of the Instantaneous Strength

Dynamics analysis and characteristics of the 8-PSS flexible redundant parallel manipulator

Research on High Precision Stiffness Modeling Method of Redundant Over-Constrained Parallel Mechanism.

Evaluation and Performance Testing of Eccentric Rolling Isolation System