Abstract:Polysilicate-ferric (PSF) prepared with water glass, FeSO4·7H2O and oxidant by co-polymerization is a new kind of inorganic polymer coagulant for water and wastewater treatment. Acid, as a medium, played a vital role in the preparation and polymerization of PSF. In this experiments, four PSF coagulants were prepared with different acid (HCl, H2SO4, H3PO4 and CH3COOH), which were denoted as PSF(Cl), PSF(S), PSF(P) and PSF(C) respectively. The objective of this work is to study the influence of acid on physico-chemical property and surface morphology of PSF and on the coagulation performance as well. To do so, scanning electron microscope (SEM) analyses were used to investigate the surface properties and morphology of PSF coagulants. Infra-red (IR) spectroscopy was used to characterize the structure of PSF coagulants. Results showed that PSF(Cl), PSF(S) and PSF(C) possessed three-dimensional cluster structure and higher surface area. PSF(C) possessed the best stability performance among the four PSF coagulants. The comparison of coagulation efficiencies for turbidity, UV254, CODMn and TOC by PSF (Cl), PSF(S), PSF (P) and PSF(C) were investigated by batch experiments. The results showed that the retardation of acetic acid was favorable to the stability and coagulation performance of PSF. The removal efficiencies of turbidity, UV254 and CODMn by PSF(C) were the best compared with other PSF coagulants at the same dosage. The good coagulation efficiencies of PSF(C) at 0.21mmol Fe/L were 92.4% for UV254 removal, 98.5% for turbidity removal and 73.5% for CODMn removal, however, acetic acid introduced organic carbon which led to a high total organic carbon (TOC) concentration.

Study on the Coagulation of Composite Coagulant Poly Aluminum Ferric Silicate Chloride(pafsc)in Water Treatment

Study on the Coagulation of Polyaluminum Silicate Chloride(PASC)in Water Treatment

Novel ferromagnetic nanoparticle composited PACls and their coagulation characteristics.

Comparison Study on Coagulating to Remove Algae by Poly Aluminum Ferric Silicate Chloride and Polymeric Aluminum Chlorid

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Preparation of a Composite Coagulant: Polymeric Aluminum Ferric Sulfate (PAFS) for Wastewater Treatment

Characterization and coagulation–flocculation behavior of polymeric aluminum ferric sulfate (PAFS)

Study on Structural Characterization and Algae-Removing Efficiency of Polymeric Aluminum Ferric Sulfate (PAFS)

The coagulating characteristics of polymeric aluminum ferric chloride(P AFC)

Coagulation performance and mechanism of poly-silicic-ferric coagulant

Study on Coagulation Property of Metal-Polysilicate Coagulants in Low Turbidity Water Treatment

Optimization of Preparation and Application of Polymeric Aluminum Ferric Sulfate Coagulant by Response Surface Analysis

STUDY ON PHOSPHORUS REMOVAL OF EFFLUENT FROM MUNICIPAL WASTEWATER TREATMENT PLANT BY POLYALUMINUM FERRIC SULFATE SILICATE

Study of the influential factors of poly-aluminum chloride on the coagulation performance

PREPARATION AND APPLICATION OF POLYMER FERRIC ALUMINUM SULFATE CHLORIDE FLOCCULANT

Preparation and coagulation-flocculation performance of covalently bound organic hybrid coagulant with excellent stability

Preparation, Characterization and Coagulation Behaviour of Polyferric Magnesium Silicate (pfmsi) Coagulant.

A novel preparation method of polyaluminum chloride/polyacrylamide composite coagulant: Composition and characteristic

Effect of acid medium on the coagulation efficiency of polysilicate-ferric (PSF)—A new kind of inorganic polymer coagulant

Coagulation Efficiency of Polysilicate-Ferric and Its Application to Metal-Processing Wastewater

Study on The Enhanced Coagulation Effect of Polyferric Sulfate and Aluminum Sulfate for Removal of Humic Acid