Abstract:Sand filters are beds of granular material placed in cylindrical metal containers. They are used as one approach for irrigation water filtration, mainly to remove organic and algae contaminants. The field effectiveness of these devices depends on their proper operation. The objectives of this study were to evaluate three commercial sand filter models, to study the effects of the internal auxiliary elements (the diffuser plate and the underdrains) and its interaction to sand particle size and media bed depth on the head loss as a function of the water flow velocity at clean water conditions. The experiment was divided in two parts. First, to assess the effects of the internal elements, the tanks (empty sand filter containers) head losses were characterized for water flow directions coincident with the processes of filtering and backwash. Second, the interactions of the internal elements with three sand particle sizes and three media bed depths were evaluated in light of the filtering flow direction. The results for the tanks showed that the different internal auxiliary elements significantly affected head loss, with the backwash flow direction generating values higher than the filtering flow direction for all evaluated equipment types. Additionally, it was observed that the head loss values were significantly affected by the sand particle size, the bed depth, the filtration velocity, and the interactions among these variables. The different models of internal elements generate distinct hydraulic performances of the sand filters, showing that they may exhibit different removal efficiencies for identical operating conditions. The research identifies the need to develop new procedures for the design of the internal elements of sand filters and for field operation conditions in order to improve localized irrigation performance.

Influence of filter working parameters on treatment efficiency effect of continuous sand filter

Pressure filtration dewatering performance of sand-washing slurry and rapid test method

Experiment on the filtration and back wash of sediment desilting filter of circular ring

Current Research Progress on Carbon-Sand Filter Process

Experimental study on the efficiency of the treatment of micro-polluted river water with biofilter

Coupling Continuous Sand Filtration to Ultrafiltration for Drinking Water Treatment: Improved Performance and Membrane Fouling Control

Influence on Organics Removal Effect of Ultrafiltration by Various Pretreatment Process

Study on Backwash Methods and Initial Filtered Water Turbidity Control of GAC-sand Filters

The effect of media bed characteristics and internal auxiliary elements on sand filter head loss

Filtration performance of active medium filter

Reclaimed Water Filtration Efficiency and Drip Irrigation Emitter Performance with Different Combinations of Sand and Disc Filters

Integrated process of nanofiltration for treating tidal salty water from Qiantang River

Effect of Filtration Modes on the Immersed UF Membrane Effluent Quality and Fouling

Yangtze River Water Treatment by Spiral UF Membrane with Coagulation Pretreatment

Influence of Some Key Parameters on the Efficiency of Flocculation–Solidification–Filter Press Combined Method for Sustainable Treatment of Waste Mud Slurry

Parameters of Manganese Sand Biological Filtration Process in Recycling of Wastewater from Steel and Iron Production

Experimental study on filtration performance of filter tank in circular central sand filter for sand discharging and desilting

Research Status and Prospect of GAC-sand Dual Media Filters Used in Drinking Water Treatment

Effect of Adding Surface Washing Process on Increasing Filter Yield and Improving Water Quality

Effect of filtration rates on the performance and head loss development in granular filters during the post-treatment of anaerobic reactor effluent

Research on Effect Mechanism of Cyclic Flow on Filtration System