Abstract:The objective of this research is to address the rut problems in asphalt pavements and to resist the permanent plastic deformation with the increasing heavy traffic loads. In this paper, a new type materials of high modulus asphalt was developed by incorporating styrene–butadiene–styrene (SBS) and zinc oxide nanoparticles (nano ZnO) with an (EME)-type high modulus modifier, guided by the synergistic effects and the preparation methods of High-speed shear. The basic road performance, mechanical response and thermal stability of the new high modulus asphalt materials were analysed through basic physical indicator tests, dynamic shear rheometer tests, thermogravimetric analysis (TGA), the time–temperature superposition principle, the Refutas model, and the Christensen-Andersen-Marasteanu model. The optimal results demonstrate that the optimal blend ratio of the developed asphalt is 12% EME/8% SBS/1.5% ZnO. Under this composition, the road performance indicator values of softening point, penetration and ductility of the modified asphalt met the standard requirements. The dynamic shear rheometer tests demonstrates that the inclusion of SBS and nano ZnO considerably enhanced the shear resistance and recovery deformation capacity of EME, effectively improving the high-temperature deformation resistance of asphalt. Furthermore,the Refutas and the Christensen-Andersen-Marasteanu model fitting results showed that adding SBS and nano ZnO considerably improved the temperature sensitivity of the EME types high modulus modified asphalt and exhibiting low frequency sensitivity. Compared to PR Module-type high modulus modifier(PRM),TGA reveals that the maximum thermal weight loss of EME-SBS-ZnO decreased by 3.5441%, indicating better thermal stability and the major character of SBS,EME and asphalt is physical reaction. Moreover, EME-nano ZnO-SBS high modulus asphalt at 64 °C shows Jnr-diff = 9.5% and passes the "E" extreme traffic grade. Additionally, its cost is 4.67% lower than that of the PRM high modulus modified asphalt, presenting considerable economic benefits.

The New Trend of the Modified Asphalt Research and Development

A New Eco-Friendly Porous Asphalt Mixture Modified By Crumb Rubber And Basalt Fiber

Research on Preparation and High Temperature Behavior of High-Modulus Asphalt

Experimental Study on Pavement Performances of SBP Modified Asphalt

Study and Application Progress of High Viscosity Modified Asphalt Used in Porous Pavement

Study on the application of modified bitumen technology in the maintenance engineering of secondary highway

Research and Application of Micro-surfacing Technology in Preventative Maintenance

Analysis of New Materials Application in Municipal Road Construction

Investigation on the Preparation and Performances of Epoxy-Modified Asphalt Binder and Its Mixtures

Research on the Influence of RAP and Aged Asphalt on the Performance of Plant-Mixed Hot Recycled Asphalt Mixture and Blended Asphalt

High temperature storage stability of asphalt modified with crumb rubber

The Study on the Application Technology of Crumb Rubber Asphalt Pavement

Simulation study on basic road performance and modification mechanism of red mud modified asphalt mixture

Study on the Performance of Modified Qingchuan Rock/Rubber Asphalt

Research Progress of Base Asphalt and Polymer-modified Asphalt Aging

Comparative Study on Durability of Different Composite Modified Asphalt Mixtures

Experimental Study on Basic Properties of Modified Biological Asphalt

Study on the Microscopic Mechanism and Performance of TPU/SBR Composite-Modified Asphalt

Investigating the pavement performance and aging resistance of modified bio-asphalt with nano-particles

Research progress in performance of tire crumb rubber modified asphalt mixture

Study on the composition and properties of EME-SBS-Nano ZnO high modulus asphalt material