Abstract:This study proposes the incorporation of waste steel slag and waste rubber into asphalt to prepare asphalt mastic with increased mechanical properties and can thus concurrently limit environmental pollution from these wastes. The surface of crumb rubber (CR) was activated by NaClO and was then treated with KH550 silane coupling modifier. Dynamic shear rheometer (DSR), multi-stress creep recovery (MSCR) and zero shear viscosity (ZSV) tests were applied explore the high temperature performance of asphalt mastic. The performance of asphalt mastic was analyzed by Burgers model, and the enhancement mechanism was analyzed by Fourier transform infra-red (FTIR) spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray (EDX), fluorescent microscopy (FM), and X-ray diffraction (XRD). Experimental results showed that coupling modified CR improved the complex modulus (G*) and rutting factor (G*/sinδ) and reduced the temperature sensitivity of asphalt mastic. The coupling modified CR increased the elasticity coefficient E1, viscosity coefficient η1, relaxation time η1/E1 and delay time η2/E2 of asphalt mastic by 2.8 times, 3.6 times, 1.3 times and 0.9 times, respectively, while steel slag powder (SSP) further enhanced the mechanical properties of the asphalt mastic. FM test showed that coupling modifier CR promoted the swelling of CR and SBS polymer, and hence resulted in a well-developed cross-linked network structure in the asphalt. The positive effect of SSP on the high temperature properties of asphalt mastic suggests that the use of SSP and CR in pavement engineering provides a sustainable solution for the disposal of industrial wastes and the preparation of new asphalt mastic with higher mechanical and thermal properties for practical applications.

Research and Application of Micro-surfacing Technology in Preventative Maintenance

Experimental Study on Pavement Performances of SBP Modified Asphalt

Validation of Adhesive and Temperature Property Characteristics of Microsurfacing by Performance-Based Mixture Design Approach

Research on Preparation and High Temperature Behavior of High-Modulus Asphalt

Brief Analysis of Microsurfacing Mixture Ratio Design

An Active Anti-Aging Technology for Asphalt Mixture

Experimental Study on Anti-Aging Effect of Asphalt Binder Liquid Anti-Aging Agent

Study on the performance and sustainability of modified waste crumb rubber and steel slag powder/SBS composite modified asphalt mastic

Study on Adhesion Performance and Aging Strength Degradation Mechanism of SBS Modified Asphalt with Different Anti-Aging Additive

Investigation of Surface Micro-Mechanical Properties of Various Asphalt Binders Using AFM

Analysis of New Materials Application in Municipal Road Construction

Study on the performance and mechanism of physicochemically modified asphalt based on spatial crosslinking by the crumb rubber and polyurethane precursor

Anti-Aging Performance and Action Mechanism of Asphalt Modified by Composite Modification

Preparation and Short-Term Aging Properties of Asphalt Modified by Novel Sustained-Release Microcapsules Containing Rejuvenator

The short-term aging effect on the interface and surface wetting behavior of modified asphalt mixtures

Study on the influencing factors of mechanical properties of anti-icing modified asphalt mortar

The Study on the Application Technology of Crumb Rubber Asphalt Pavement

Study on the application of modified bitumen technology in the maintenance engineering of secondary highway

Study on the Microscopic Mechanism and Performance of TPU/SBR Composite-Modified Asphalt

Study on Anti-Aging Performance Enhancement of Polymer Modified Asphalt with High Linear SBS Content

A Study on the Microscopic Properties of the Oil–Stone Interfacial Phase of a Reclaimed Asphalt Mixture Based on Molecular Dynamics Simulation