Abstract:After aging, the adhesiveness of asphalt deteriorates, leading to a reduction in the durability of asphalt mixtures and affecting the service life of asphalt pavements. To enhance the anti-aging performance of asphalt, this study employed the method of melt blending to prepare three types of modified asphalt: graphene/SBS modified asphalt (G/SBSMA), crumb rubber/SBS modified asphalt (CR/SBSMA), and petroleum resin/SBS modified asphalt (PR/SBSMA). Different dosages of the three types of modified asphalt were tested for changes in conventional performance indicators. The optimal dosages of graphene, crumb rubber, and C9 petroleum resin were determined to be 2%, 15%, and 5%, respectively. Based on the theory of surface free energy, the effects of anti-aging agents on the microscopic properties of SBS modified asphalt before and after aging were analyzed using the three-liquid method. The mechanisms of strength attenuation at the asphalt–aggregate interface under water exposure and aging were revealed. The results showed that with the increase of aging gradient, the asphalt-aggregate biphasic system became more active. The cohesive energy and peel energy of SBS modified asphalt increased continuously, while the adhesive energy decreased continuously, leading to a decrease in the energy ratio parameter. Resin-based anti-aging agents exhibited the most significant improvement in asphalt adhesion performance, while graphene demonstrated a more stable enhancement in asphalt's water stability during the aging stage.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is the decline in the adhesion performance of asphalt after aging, which will lead to a decrease in the durability of asphalt mixtures and thus affect the service life of asphalt pavements. Specifically, the paper aims to find methods that can effectively improve the anti - aging performance of asphalt by studying the influence of different anti - aging additives on the adhesion performance of SBS - modified asphalt and the degradation mechanism of aging strength. The following are the core problems and goals of the paper: 1. **Improve the adhesion performance between asphalt and aggregates**: The adhesion performance of aged asphalt decreases, which is likely to cause problems such as cracks, loosening, and potholes on the pavement. Therefore, improving the adhesion performance between asphalt and aggregates is an important goal in road engineering. 2. **Enhance the long - term anti - aging ability of asphalt**: By adding different types of anti - aging agents (such as nano - graphene, rubber powder, C9 petroleum resin), study how these additives affect the aging process of SBS - modified asphalt, especially the changes in its microscopic properties before and after aging. 3. **Reveal the degradation mechanism of mechanical properties at the asphalt - aggregate interface during the aging process**: Through experimental and theoretical analysis, explore the change laws of parameters such as adhesion energy and peeling energy at the asphalt - aggregate interface under water exposure and aging conditions, and reveal the mechanism of its strength attenuation. 4. **Compare the effects of different anti - aging agents**: By comparing the influence of different anti - aging agents on the adhesion performance of asphalt, provide a basis for selecting appropriate asphalt binders in practical engineering applications, especially in application scenarios such as asphalt pavements, bridge deck pavements, and ultra - thin overlays. ### Main research methods To achieve the above goals, the paper adopts the following methods: - **Preparation of composite - modified asphalt**: Three types of composite - modified asphalt were prepared by the melt - blending method: graphene/SBS - modified asphalt (G/SBSMA), rubber powder/SBS - modified asphalt (CR/SBSMA), and petroleum resin/SBS - modified asphalt (PR/SBSMA). - **Aging tests**: Short - term aging (rotary thin - film heating test) and long - term aging (pressure aging test) were carried out to simulate the aging process of asphalt in actual use. - **Surface free energy method**: Based on the three - liquid method to measure the contact angle, calculate parameters such as the adhesion energy and cohesive energy between asphalt and aggregates, and quantitatively analyze the changes in the adhesion performance of the asphalt - aggregate interface before and after aging. Through these studies, the paper not only reveals the influence mechanisms of different anti - aging agents on the adhesion performance and aging strength of SBS - modified asphalt, but also provides scientific basis and technical support for practical engineering applications.

Study on Adhesion Performance and Aging Strength Degradation Mechanism of SBS Modified Asphalt with Different Anti-Aging Additive

Microscopic Analysis of Aging Effects on the Adhesion Properties Between Asphalt and Mineral Aggregate

Comparative Analysis of Rheological and Microscopic Performance of SBS Modified Asphalt Based on Field Aging and Laboratory Aging

Evaluation of Rheological and Aging Behavior of Modified Asphalt Based on Activation Energy of Viscous Flow

Experimental investigation on the effects of a new anti-stripping additive on performance properties of asphalt and its mixtures

Molecular simulation and experimental analysis on co-aging behaviors of SBS modifier and asphalt in SBS-modified asphalt

Experimental Investigation of the High-Temperature Rheological and Aging Resistance Properties of Activated Crumb Rubber Powder/SBS Composite-Modified Asphalt

Influence of Thermo-Oxidative Aging on the Properties of SBS-Modified Asphalt Binders

Study on Anti-Aging Performance Enhancement of Polymer Modified Asphalt with High Linear SBS Content

Study on aging mechanism of SBS/SBR compound-modified asphalt based on molecular dynamics

Study of the Molecular Components and Rheological Properties of Asphalt after Long-Term Aging under the Action of Moisture

Research on the anti-aging mechanism of SBS-modified asphalt compounded with multidimensional nanomaterials based on atomic force microscopy

Aging effects on asphalt adhesive properties: molecular dynamics simulation of chemical composition and structural changes

Experimental Study on Anti-Aging Effect of Asphalt Binder Liquid Anti-Aging Agent

Effects of Aging on Rheological Properties and Microstructural Evolution of SBS Modified Asphalt and Crumb Rubber Modified Asphalt Binders

Adhesion mechanism of warm-mixed recycled SBS Modified Asphalt Binder: Surface free energy, microstructure and chemical compositions

Multi-scale Investigation on Water Stability and Anti-Aging Performance of Granite Asphalt Mixture Modified with Composite Anti-Stripping Agents

Performance of SBS Modified Asphalt and Influence of Aging

Evaluation of the interface adhesion mechanism between SBS asphalt and aggregates under UV aging through molecular dynamics

Characterization of the Tensile Properties and Nanoscale Phase Structures of Modified Asphalts and Their Aging Behavior

Multi scale investigation on the failure mechanism of adhesion between asphalt and aggregate caused by aging