Abstract:Hydrodynamic pressure exerted on a plunge pool slab by jet impingement is of high interest in high dam projects. The present study experimentally investigated the characteristics of pressure induced by a jet through a constant width flip bucket (CFB) and a slit flip bucket (SFB). A pressurized plane pipe was employed in the flume experiments to control the inlet velocities in the flip buckets. A concise method is proposed to predict the mean dynamic pressure field. Its implementation is summarized as follows: First, the position of the pressure field is determined by the trajectories of free jets, and to calculate its trajectories, an equation based on parabolic trajectory theory is used; second, the maximum mean dynamic pressure is obtained through dimensional analysis, and then the pressure field is established by applying the law of Gaussian distribution. Those steps are integrated into a concise computing procedure by using some easy-to-obtain parameters. Some key parameters, such as takeoff velocity coefficient, takeoff angle coefficient, and the parameter k2, are also investigated in this paper. The formulas of these coefficients are obtained by fitting the experimental data. Using the proposed method, the easy-to-obtain geometric parameters and initial hydraulic conditions can be used to calculate the maximum mean dynamic pressure on the slab. A comparison between experimental data and calculated results confirmed the practicability of this model. These research results provide a reference for hydraulic applications.

Analysis about the Slamming Pressure Peak Value on a Flat-Bottom Structure

The Distribution of Slamming Pressure on Flat-Bottom Structure

Simulation of flat-bottom structure slamming

Simulation Analysis on the Role of Air Cushion in the Slamming of a Flat-Bottom Structure

Multiphase Flow Simulation of Water Entry of a Structure with Complex Geometry Using a Three-Dimensional Parallel Compressible Model

Formulations of Hydrodynamic Force in the Transition Stage of the Water Entry of Linear Wedges with Constant and Varying Speeds

Numerical Study of Flat Plate Impact on Water Using a Compressible CIP–IBM–Based Model

Dynamic Characteristics and Flow Field Evolution of Flat Plate Water Entry Slamming Based on Smoothed Particle Hydrodynamics

Prediction of slamming pressure on a flat-bottom structure by means of Neural Network

Numerical Investigation of Wave Slamming of Flat Bottom Body During Water Entry Process

Experimental and Numerical Prediction of Slamming Impact Loads Considering Fluid–Structure Interactions

Experimental investigation on the slamming loads of a truncated 3D stern model entering into water

The 3D Numerical Simulation on Water Entry of a Flat Plate and Cones

Numerical Simulation of Random Wave Slamming on Structures in the Splash Zone

Experimental study on wave slamming

Numerical Simulation of Large Diameter Cylindrical Structure Slamming

Experimental and Numerical Study of Slamming Problem for a Trimaran Hull

Numerical Simulation To The Effect Of Air In Dam-Break Problem

Numerical Investigation on the Water Entry of Convex Objects Using a Multiphase Smoothed Particle Hydrodynamics Model

A Concise Method to Predict the Mean Dynamic Pressure on a Plunge Pool Slab

The Application of Fast Multipole Boundary Element Method to the Calculation of Slamming Load of Three-Dimensional Elastic Sphere