Abstract:The current research of real-time observation for vehicle roll steer angle and compliance steer angle(both of them comprehensively referred as the additional steer angle in this paper) mainly employs the linear vehicle dynamic model, in which only the lateral acceleration of vehicle body is considered. The observation accuracy resorting to this method cannot meet the requirements of vehicle real-time stability control, especially under extreme driving conditions. The paper explores the solution resorting to experimental method. Firstly, a multi-body dynamic model of a passenger car is built based on the ADAMS/Car software, whose dynamic accuracy is verified by the same vehicle’s roadway test data of steady static circular test. Based on this simulation platform, several influencing factors of additional steer angle under different driving conditions are quantitatively analyzed. Then ɛ-SVR algorithm is employed to build the additional steer angle prediction model, whose input vectors mainly include the sensor information of standard electronic stability control system(ESC). The method of typical slalom tests and FMVSS 126 tests are adopted to make simulation, train model and test model’s generalization performance. The test result shows that the influence of lateral acceleration on additional steer angle is maximal (the magnitude up to 1°), followed by the longitudinal acceleration-deceleration and the road wave amplitude (the magnitude up to 0.3°). Moreover, both the prediction accuracy and the calculation real-time of the model can meet the control requirements of ESC. This research expands the accurate observation methods of the additional steer angle under extreme driving conditions.

Factors of Body Roll Angles Correspond to Vehicle Steady Steering Characteristics

The Study on the Handling and Stability Test of Vehicles Based on ADMS and WTK

Vehicle Steering Stability Researched by Redeveloped Module of ADAMS/CAR

Study on the Time Lag Between Steering Input and Vehicle Lateral Acceleration Response under Different Key Vehicle Parameters

Experimental Model and Analytic Solution for Real-Time Observation of Vehicle’s Additional Steer Angle

Safety simulation and tests of automotive steering mechanism

CAE ANALYSIS TECHNIQUES OF AUTOMOTIVE HANDLING AND STABILITY CHARACTERISTICS AND APPLICATIONS

Study of Vehicle Handing Stability Based on ADAMS/Car

Effect of Auto Parts Manufacturing Deviations to Front-wheel Positioning Parameters

Modeling and Simulating the Vehicle Riding Dynamics Considering Gradient Effects

Simulation Analysis of Vehicle Handing Stability Based on ADAMS/Car

The Effects of Front Wheel Caster Angle on Vehicle Steering Stability with Consideration of Body Roll

A theoretical study of the yaw/roll motions of a multiple steering articulated vehicle

Modeling and analysis of the vehicle dynamic stability coefficient for limit conditions

Control Studies of Steering Characteristics of Commercial Three-Axle Vehicle for Front and Rear Wheels Steering

Modeling and analysis of vehicle stability region based on Lyapunov and coordinated control

Research on Dynamics Steering Characteristics of a FSAE Racing Car on Bend Routes

Vehicle Dynamic Simulation with MATLAB

STUDY ON STEERING WHEEL SHIMMY OF A CAR AT HIGH VELOCITY

Integrated Design for Steering System and Suspension

Study on the Effect of Stiffness Matching of Anti-Roll Bar in Front and Rear of Vehicle on the Handling Stability