Abstract:Methane (CH4) is the main component of natural gas and produces less carbon dioxide for each unit of heat released and more heat per unit mass than other hydrocarbon fuels, and it is thus considered to be an environmental-friendly fuel. The explosion and detonation hazards associated with methane mixtures deserve special attention because of their potential safety hazards. Acoustically absorbing materials are effective in damping out the transverse wave of a detonation structure. A detonation could be attenuated or prohibited after passing over this material, but the failure mechanism of the detonation still needs further exploration. In this study, tubes made of an acoustically absorbing material (hole diameters of the wall are from 30 μm to 300 μm) are inserted in the smooth rigid wall tube to investigate the effect of the porous-walled material on the detonation propagation at the near-limit conditions. Porous-walled tubes with three different scales (L/D = 3.85, 7.69, and 15.38) are studied. Photodiodes and smoked foils are employed to simultaneously measure the local velocity of the combustion waves and record the cellular detonation structures, respectively. The results show that, for shorter porous-walled tubes, the prohibition effect of the absorbing material on the detonation propagation is only prominent at the critical and sub-critical conditions, but the material has a minor effect on the detonation propagation at the super-critical condition. In addition, the prohibition effect of the porous material on the detonation propagation becomes more evident with the increased length of the acoustically absorbing material. This outcome occurs because a transverse wave plays an important role in the propagation of a self-sustained detonation, as it is partially damped during the transmission of the detonation through the porous-walled tube; thus, extending the length of the porous-walled section results in increasing the losses of the incident and reflected shock waves due to a greater expansion and mass divergence into porous material. Therefore, the velocity of the combustion wave decreases faster in the downstream of the porous material with an increased length. On the other hand, the methane-oxygen mixture has a highly irregular cellular pattern and is characterized as an unstable mixture with a high degree of instability. The strong instability leads to an enhanced ability to generate new transverse waves in the far downstream, and therefore, at the super-critical condition (a relatively higher initial pressure), the instability partly compensates for the negative effect of the acoustically absorbing material on the detonation propagation.

Experimental Investigation of Acoustic Absorption of Detonation by Absorbing Materials Lining Wall

The Experimental Study of Strength Attenuation of Gaseous Detonation Wave Through Acoustic Absorbing Walled Channel

The Attenuation and Reignition of a Gaseous Detonation Propagating Through a Perforated Steel Plate Section

Effect of acoustically absorbing wall tubes on the near-limit detonation propagation behaviors in a methane–oxygen mixture

The Re-intension Process of Gaseous Detonation Downstream of the Acoustic Absorbing Walled Section

Effect of Porous Wall on Detonation Propagation Velocity in Hydrogen-Oxygen Mixtures

Experimental study on pressure evolution of detonation waves penetrating into water

Investigation on the Dynamics of Shock Wave Generated by Detonation Reflection

Experimental Research on the Characteristic of Impact Caused by a Blast of Inflammable Mixture to a Rigid Wall

Experimental Study on the Propagation Mechanism of Acetylene-Air Detonation Waves in a Unilaterally Intermittently Constrained Channel

Experimental investigation on gaseous detonation propagation through a heart-shape tube

Experimental Study of Detonation Propagation in a Duct Filled with Repeated Slit-Plates: Propagation Limits and Re-initiation Behaviors

The Comparison between Diffraction of Air Shock Wave and Gaseous Detonation Wave in a 90° Branched Duct

Mitigation of H2/air Gaseous Detonation Via Utilization of PAN-based Carbon Fibre Felt

The Attenuation of Gaseous Detonation Strength as a Result of the Bumper-Separator in Expanding Cavity of the Detonation Arrester

Investigation of Near-Limit Detonation Propagation in a Tube with Helical Spiral

Experimental Investigation on the Propagation Process of Combustion Wave in the Annular Channel Filled with Acetylene-Air/Oxygen Mixture

Experimental Research on Dynamic Response Mechanism of Thin Cylindrical Shell under Blast Loading

RESEARCH INTO IMPACT EFFECT ON WALL AND FLOW AROUND WALL OF EXPLOSIVE SHOCK WAVE

Attenuation of the detonation wave in hydrogen–air mixture

Experimental investigation on gaseous detonation propagation in a semi-circle bend tube