Abstract:The dynamics of intragranular ferrite (IGF) formation in inclusion engineered steels with either Ti2O3 or TiN addition were investigated using in situ high temperature confocal laser scanning microscopy. Furthermore, the chemical composition of the inclusions and the final microstructure after continuous cooling transformation was investigated using electron probe microanalysis and electron backscatter diffraction, respectively. It was found that there is a significant effect of the chemical composition of the inclusions, the cooling rate, and the prior austenite grain size on the phase fractions and the starting temperatures of IGF and grain boundary ferrite (GBF). The fraction of IGF is larger in the steel with Ti2O3 addition compared to the steel with TiN addition after the same thermal cycle has been imposed. The reason for this difference is the higher potency of the TiOx phase as nucleation sites for IGF formation compared to the TiN phase, which was supported by calculations using classical nucleation theory. The IGF fraction increases with increasing prior austenite grain size, while the fraction of IGF in both steels was the highest for the intermediate cooling rate of 70 °C/min, since competing phase transformations were avoided, the structure of the IGF was though refined with increasing cooling rate. Finally, regarding the starting temperatures of IGF and GBF, they decrease with increasing cooling rate and the starting temperature of GBF decreases with increasing grain size, while the starting temperature of IGF remains constant irrespective of grain size.

Intragranular Ferrite and Microstructure Control in Low Carbon Microalloyed Steels

Study on Three-Dimensional Morphology of Intragranular Nucleating Ferrites in Low Carbon Steels

Kinetics and Mechanisms of Intragranular Ferrite Nucleation on Non-Metallic Inclusions in Low Carbon Steels

The Mechanism of Intragranular Ferrite Nucleation on Inclusion in Steel

Micromechanism involved in ultrafine grained ferrite/martensite dual phase steels strengthened by nanoscale Cu-rich precipitates

Microstructure Refinement of Structural Steel in China

MICROSTRUCTURAL REFINEMENT OF STRUCTURAL STEELS

Progress of Theory and Controlled Technology of Ultrafine Grained Steel

Microstructure Refinement via Nucleation of Intragranular Acicular Ferrite Stimulated by Ti-Containing Core–Shell Structured Particles in Low-Carbon Steel

Influence of Prior Austenite Deformation and Non-Metallic Inclusions on Ferrite Formation in Low-Carbon Steels

Influence of TiO2 on Intragranular Acicular Ferrite Nucleation in Low-Carbon Steel

Ferrite Formation Dynamics and Microstructure Due to Inclusion Engineering in Low-Alloy Steels by Ti2O3 and TiN Addition

Clustering, nano-scale precipitation and strengthening of steels

Microsegregation Influence on Austenite Formation from Ferrite and Cementite in Fe–C–Mn–Si and Fe–C–Si Steels

Revisiting the formation mechanism of intragranular κ-carbide in austenite of a Fe-Mn-Al-Cr-C low-density steel

Austenite/Ferrite Interface Migration and Alloying Elements Partitioning: an Overview

New Microstructural Features Occurring During Transformation from Austenite to Ferrite under the Kinetic Influence of Magnetic Field in A Medium Carbon Steel

The Netted Ferrite at Grain Boundaries in the Steels with Thermomechanical Processing

Microstructure Ultrafining Treatment of Ultrahigh Carbon Steel

Effect of Adding Ceramic Particles on Grain Refining in Low Carbon Microalloy Steel

The austenite to polygonal ferrite transformation in low-alloy steel: multi-phase-field simulation