Abstract:Designing a composite separator that can withstand high temperature, deliver high capacity, and offer fast charge–discharge capability is imperative for developing a high-performance lithium-ion battery. Here, a series of ceramic nanoparticle-coated nanofiber membranes, including Al2O3/poly(vinylidene fluoride) (PVDF), SiO2/PVDF, and Al2O3/SiO2/PVDF, were prepared by melt-electrospinning and magnetron sputtering deposition. Among all of these composite separators, Al2O3/SiO2/PVDF showed several advantages including excellent thermal stability (no dimensional shrinkage at temperature up to 130 °C and an onset degradation temperature of 445 °C) and superb electrolyte compatibility (340% electrolyte uptake). In addition, the β phase of the fibrous PVDF membrane as well as the presence of polar ceramic nanoparticles on the fiber surface can synergistically improve the ion conductivity to 2.055 mS/cm at room temperature, which is more than 8 times higher than that of the commercial polyethylene (PE) separator. Performance of these ceramic nanoparticle-coated separators in a lithium-ion battery demonstrated an improved discharge capacity of 161.5 mAh/g and more than 84.3% capacity retention rate after 100 cycles. The ceramic nanoparticle-coated PVDF separators also maintained 58.4% capacity at a high current density of 8C, which is better than the 49.8% capacity for the commercial PE separator. Therefore, the ceramic nanoparticle-coated PVDF membrane proves to be a promising separator for a high-power and more secure lithium-ion battery.

The microglass fiber compound separator filled with nanometer SiO2

Hybrid glass fibre separators

Glass Fiber Separator Coated by Porous Carbon Nanofiber Derived from Immiscible PAN/PMMA for High-Performance Lithium-Sulfur Batteries

A Porous Li4SiO4 Ceramic Separator for Lithium-Ion Batteries

Glass Fiber Fabric Mat As the Separator for Lithium-Ion Battery with High Safety Performance

Effect of SiO2 Content on Performance of Polypropylene Separator for Lithium‐ion Batteries

Study on ZrO2 Separator for High Pressure Ni-H2 Battery

Sandwiched aramid nanofiber/Al 2 O 3 -coated polyolefin separators for advanced lithium–sulfur batteries

Optimizing Lithium-Ion Battery Discharge Capacity Performance by Nanosilica-Modified Poly (Vinyl Alcohol) Separator

Preparation and Performance of Silica/polypropylene Composite Separator for Lithium-Ion Batteries

Porous SiO2 as a separator to improve the electrochemical performance of spinel LiMn2O4 cathode

Fabrication and Investigation of PE-SiO2@PZS Composite Separator for Lithium-Ion Batteries

Molecular Sieve-Modified Separator for High-Performance Lithium-Ion Batteries

A tailored ceramic composite separator with electron-rich groups for high-performance lithium metal anode

A Quasi-Solid Composite Separator with High Ductility for Safe and High-Performance Lithium-Ion Batteries

Nanosilica-Filled Flame-Retardant Copolyester Electrospun Composite Separators for High-Performance Safe Lithium-Ion Batteries

Ceramic Nanoparticle-Decorated Melt-Electrospun PVDF Nanofiber Membrane with Enhanced Performance as a Lithium-Ion Battery Separator

A Scalable Hybrid Separator for A High Performance Lithium-Sulfur Battery

The High Performances of Sio2/Al2o3-Coated Electrospun Polyimide Fibrous Separator for Lithium-Ion Battery

Composite MnCO3/PVDF-HFP Separator Towards High-Performance Lithium-Ion Batteries