Abstract:Lithium sulfur batteries (LSB) can offer great opportunities for the next-generation energy storage systems required for electrical vehicles and grid energy storage applications due to its very high theoretical specific energy (2500 Wh kg −1 ). For the practical applications, the sulfur loading in the cathode should not be lower than 70wt% in order to achieve a high energy density. However, the electrical and/or ionic conductivity of the cathode can be reduced with a high S loading, respectively, leading to reduced sulfur utilization and slurry reaction kinetic. In order to overcome this issue, sulfur active species were first dissolved together with Li 2 S in the electrolyte to form lithium polysulfide (LiPolS) (e.g., Li 2 S 8 and Li 2 S 6 ) solution or catholyte. During cycling, the active sulfur (Li 2 S 8 ) is deposited from the electrolyte into the S-free cathode conductive matrix, which could be made from carbon nanotube and carbon nanofiber. It has been demonstrated that the specific/areal capacity of Li – lithium polysulfide (Li-LiPS) cells show high specific capacity, indicating high S utilization as well as high reaction kinetic. However, the problem is the penetration of dissolved LiPSs through the separator to react with the Li metal anode and reduce to form short-chain LiPSs, resulting to the passivation of the anode with irreversible deposits on its surface. In order to mitigate this problem, a lithiated-polyamic acid functionalized glass microfibers (GF@PALi) was utilized as a functional separator to selectively transfer Li + ions. The GF@PALi was prepared by simply dipping of commercial GF into aqueous solution of 5 wt% lithiated-polyamic acid and dried overnight at 60 o C in vacuum oven. Combined with CNTs on Ni foam electrode, catholyte of 0.4 M LiTFSI + 2.0 M Li 2 S 8 + 1.0 M LiNO 3 in DME/DOL and lithium anode, the fabricated LSB cell exhibits a high specific and areal capacities of 803 mAh g -1 and 2.43 mAh cm -2 at C/2 rate, respectively. In addition, the LSB cell with the GF@PALi separator presents a remarkable cycling durability until 200 cycles with 76% capacity retention, which is much more stable than the LSB cell with commercial Celgard PP separator working until 86 cycles. Such high durability could be attributed to the retarding polysulfide migration of the as-prepared GF@PALi separator. Figure 1

Hybrid glass fibre separators

The Study of Modified AGM Separators of VRLA Batteries

Choice Method of the Separator for Spiral Lead-Acid Battery

The microglass fiber compound separator filled with nanometer SiO2

An Expanded Clay-Coated Separator with Unique Microporous Structure for Enhancing Electrochemical Performance of Rechargeable Hybrid Aqueous Batteries

Glass Fiber Separator Coated by Porous Carbon Nanofiber Derived from Immiscible PAN/PMMA for High-Performance Lithium-Sulfur Batteries

Glass Fiber Fabric Mat As the Separator for Lithium-Ion Battery with High Safety Performance

Polyethylene Battery Separator with Auto‐shutdown Ability, Thermal Stability of 220°C, and Hydrophilic Surface Via Solid‐state Ultraviolet Irradiation

Effect of Fumed Silica Concentration and Separator Type on the Electrochemical Performance of Gel Electrolyte in the Rechargeable Hybrid Aqueous Battery

Technology status and application of separators used in lead-acid battery

A Scalable Hybrid Separator for A High Performance Lithium-Sulfur Battery

Highly Thermally Stable, Highly Electrolyte-Wettable Hydroxyapatite/Cellulose Nanofiber Hybrid Separators for Lithium-Ion Batteries

Composite MnCO3/PVDF-HFP Separator Towards High-Performance Lithium-Ion Batteries

A Quasi-Solid Composite Separator with High Ductility for Safe and High-Performance Lithium-Ion Batteries

Functionalized Non-Glass Fiber Nanoporous Separator for High-Performance Aqueous Zinc Ion Batteries

Lithiated-Polyamic Acid-Coated Glass Fiber As a Functional Separator for High-Performance Li-S Batteries

On the Use of Recycled PVB to Develop Sustainable Separators for Greener Li‐Ion Batteries

Poly(vinylidene Fluoride)/poly(acrylonitrile) Blend Fibrous Membranes by Centrifugal Spinning for High‐performance Lithium Ion Battery Separators

Cu(II)/Polydopamine-Modified Glass Fiber Separators for High-Performance Zinc-Ion Batteries

A superior thermostable and nonflammable composite membrane towards high power battery separator

Enhanced Performance of High Energy Density Lithium Metal Battery with PVDF-HFP/LAGP Composite Separator