Abstract:Background: Zinc-air battery (ZAB) is a promising candidate for energy storage, but the short cycle life severely restricts the wider practical applications. Up to date, no consensus on the dominant factors affecting ZABs cycle life was reached to help understanding how to prolong the ZAB's cycle life. Here, a series of replacement experiments based on the ZAB were conducted to confirm the pivotal factors that influence the cycle life at different depths of discharge (DOD). Method: The morphology and composition of the components of the battery were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and chemical titration analyses. Result: SEM images and XRD results revealed that the failure of the zinc anode gradually deepens with the increase of DOD, while the performance degradation of the tricobalt tetroxide/Carbon Black (Co 3 O 4 /CB) air cathode depends on the operating time. The concentration of CO 3 2− depends on the charge/discharge cycle time. The replacement experiments results show that the dominant factors affecting the ZAB's cycle life is the reduction of active sites on the surface of Co 3 O 4 /CB air cathode at a shallow DOD, while that is the carbonation of the electrolyte at a deep DOD. The reduction of active sites on the surface of Co 3 O 4 /CB air cathode is caused by the coverage of K 2 CO 3 precipitated by carbonation of the electrolyte, suggesting that the carbonation of the alkaline electrolyte limits ZAB's cycle life. Conclusion: Therefore, this work not only further discloses the failure mechanism of ZAB, but also provides some feasible guidance to design a ZAB with along cycle life.

Failure Mechanism of Valve-Regulated Lead Acid Battery for Deep Cycle Application

Study on the failure mechanism for positive plate of VRLA battery

Performance Study of Large Capacity Industrial Lead‑carbon Battery for Energy Storage

Research on the Mechanism of Cathode Failure of Lead-Acid Battery Under Extreme Conditions

Study on failure mechanism on rechargeable alkaline zinc–Air battery during charge/discharge cycles at different depths of discharge

Development of VRLA battery used for power supply

Analysis of Reaction Mechanism for VRLA Battery

Valve-regulated battery in standby application

Probing the Initiation of Voltage Decay in Li-rich Layered Cathode Materials at the Atomic Scale

Discussion of the relationship between failure and fire of valve regulated lead acid battery

Valve Regulated Lead Acid Battery Evaluation under Peak Shaving and Frequency Regulation Duty Cycles

Study of electrochemically active carbon, Ga2O3 and Bi2O3 as negative additives for valve-regulated lead-acid batteries working under high-rate, partial-state-of-charge conditions

Cycling Life Prediction by Reaction Depth Index Analysis of Lead Acid Battery

The charge algorithms of the deep-cycle lead acid battery

VRLA batteries with deep cyclic performance for electric bikes(Ⅱ) ——the cyclic life of the batteries

Rate-Dependent Failure Mechanisms and Mitigating Strategies of Anode-Free Lithium Metal Batteries

Internal failure of anode materials for lithium batteries — A critical review

Aging Mechanism of Ni-rich Cathode-Based Lithium-Ion Batteries: Focusing on Upper Cut-off Voltages

Lithium plating on the anode for lithium-ion batteries during long-term low temperature cycling

Enhanced cycle performance and lifetime estimation of lead-acid batteries