Abstract:To improve the wear resistance of high chromium white cast iron under severe abrasive conditions, a composites layer was designed for wear surface, which were locally reinforced with WC particles. And the local composites were successfully fabricated by optimized centrifugal casting process. Then the interface between WC and iron matrix was analyzed with scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). And three body wear tests were carried out on a self-made rig to investigate the wear resistance of the composites. For comparison, the wear tests of high chromium white cast iron were also carried out under the same conditions. The results show that: There are no defects such as inclusion, crack, gas pore and so on in the obtained composites layer, which with a uniform thickness of 10 mm. WC particles are homogeneously distributed in the composites layer and tightly bonded with the iron matrix. The WC particles are partially dissolved in the iron matrix during centrifugal casting. The elements W, C and Fe react to form new carbides such as Fe3W3C or M23C6, which precipitate around former WC particles during subsequent solidification. So the interface between WC particles and the iron matrix is a strong metallurgical bonding. WC particles in the composites layer can effectively resist cutting by the abrasive, and then protect the matrix. The wear resistance of the composites layer is 7.23 times of that of high chromium cast iron.

Production and Properties of Local Strong Anti-Abrasive Composite

Study of Abrasive Wear Resistant of WC Particle Reinforced Chromium White Cast Irons Matrix Composite

Interfacial Characteristics and Wear Resistance of WCp/White-Cast-Iron Composites

Interfacial characteristics and wear resistance of WCp/white-cast-ion composites

Search for New Materials for Slurry Pumps with Erosion-wear Resistance

Three-Body Abrasive Wear Behavior of Iron Matrix Composite Reinforced with Cemented Carbide Particles

Investigates of Three-body Abrasive Wear Behavior of WC Particles Reinforced Chromium Family White Cast Irons Composites

Three- Body Abrasive Wear Behavior of Iron Matrix Composites Reinforced with Tungsten Carbide Particles

Three-body Abrasive Wear Resistance of Iron Matrix Composites Reinforced with Ceramic Particles

The Development of High Carbon Chromium Iron Power Reinforced Steel Matrix Wear-resistant Surface-layer Composite

Interface and wear characteristics of high-Cr cast iron matrix composite reinforced with cemented carbide particles

Study on Mechanism of Friction and Wear of Aluminum Matrix Composites and Its Applications

Effect of In-Situ (ti&w)c Multiphase Particles on Three-Body Abrasive Wear of High Chromium Cast Iron

Study on Surface WC Particle Reinforced Chromium Abrasion Resistant White Cast Irons Composite

On the Preparation and Wear Properties of Ceramic Particle-reinforced High-chromium Cast Iron-based Surface Composite Material

Microstructure and Wear Behavior of High-Cr WCI Matrix Surface Composite Reinforced with Cemented Carbide Rods

STUDY ON ABRASION MECHANISM OF SHORT CARBON FIBER REINFORCED Cu ALLOY MATRIX COMPOSITES

Effect of test load on wear rate of steel bonded carbide/medium Cr steel composite

Producing of WCp Reinforced SG lron Composites Firebrick Mould And Its Abrasive Wear Behavior

FABRICATION OF Al2O3/HEAT-RESISTANT STEEL COMPOSITEAND ITS WEAR-RESISTANCE AT HIGH TEMPERATURE AND ABRASIVE

Three-body abrasive wear behavior of CC/high-Cr WCI composite and its interfacial characteristics