Abstract:The divinyl silane modified self-crosslinking polyacrylate latex was successfully prepared by semicontinuous seeded emulsion polymerization. Methyl methacrylate (MMA) and butyl acrylate (BA) were used as main monomers and the reaction was initiated by potassium persulfate (KPS). The modified monomer 1, 3-divinyltetramethyldisiloxane (DVMS) and crosslinked monomer hydroxyethyl acrylate (HEA) were introduced into the basic dispersion. Sodium dodecyl sulfonate (SDS) anionic surfactant and alkyl polyglycoside (APG) nonionic emulsifier were utilized as composite emulsifiers. The structure of latex film was characterized by Fourier transform infrared spectroscopy (FTIR). The latex films were tested by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and contact angle (CA) and apparent crosslinking percentage. The particle size of the emulsion was measured by Zetatrac dynamic light scattering instrument. The optimum conditions are as follows: the amount of composite emulsifier is 5.0%, the mass ratio of SDS to APG is 1:1, the amount of initiator is 0.5%, the amount of DVMS is 5.0%, and the amount of HEA is 1.0%. The emulsion has good mechanical stability and chemical stability, and the storage stability is ideal. The dispersion is blue and translucent, with a small particle size. The apparent crosslinking percentage of the latex film is above 89%, and the highest contact angle was more than 98°. The polyacrylate colloidal film prepared in this paper has outstanding thermal stability and hydrophobicity.

Synthesis of Acrylate Emulsion Modified with Organosiloxane

Seed Semicontinuous Emulsion Multi-Copolymerization of (meth)acrylates with High-Solid Content - Effect of the Operation Conditions

Study on Silicone Modified Polyurethane-Acrylate Copolymer Emulstion

Synthesis and properties of alkoxysilane-modified acrylic latex via miniemulsion polymerization

Organize modification of silica sol and its application in adhesives

Hydrophobicity of Polyacrylate Emulsion Film Enhanced by Introduction of Nano-SiO₂ and Fluorine

Synthesis and Properties of Poly-Acrylate Emulsion Modified by Organ Silicone

Synthetic methods of acrylate polymer latexes modified with organosilicons and their film properties

Properties and Characterization of Novel Cationic Polyacrylate Latex Containing Fluorine and Silicon Prepared with Soap-Free Emulsion Polymerization

Synthesis and Characterization of Self-cross Linking Hybrid Silicone-acrylate Emulsion at Ambient Temperature

Synthesis of Acrylate Modified by Polysiloxane Core-shell Emulsion for Leather Finishing

Synthesis of Emulsion of Water-Based Nano Silicon Oxide-Polyacrylic Ester

Preparation and characterization of self-crosslinking acrylate emulsion modified by divinyl silane

Preparation of Polyacrylate Emulsion with High Adhesion Properties by Adding Modified Silica Sol

Core-Shell Emulsion Copolymerization and Characterization of Polysiloxane Bearing Vinylic Function/Acrylate Monomer

Preparation and Thermal Stability of Phosphorus Acrylic Latex Modified with Organic Silicon

Preparation of acrylate polymer/silica nanocomposite particles with high silica encapsulation efficiency via miniemulsion polymerization

Synthesis and Characterization of Waterborne Polysiloxane-Polyacrylates Dispersion

Synthesis and Use of the New Polymeric O/W Emulsifier with Salt Resistance and Solvent Resistance

Hydrophobicity of Polyacrylate Emulsion Film Enhanced by Introduction of Nano-SiO<sub>2</sub> and Fluorine

Hydrophobicity of Polyacrylate Emulsion Film Enhanced by Introduction of Nano-SiO2 and Fluorine