Abstract:Recent progress in electrocatalyst development for anodic and cathodic reactions in direct alcohol fuel cells is concisely and systemically summarized to provide a comprehensive evaluation for further designing next‐generation alcohol oxidation reaction (AOR) and oxygen reduction reaction (ORR) catalysts. With increasing energy demands and environmental issues, renewable energy‐related conversion systems have gained significant attention as a potential substitute for traditional fossil fuel‐based energy technologies. First introduced by S.W.Grove in 1838, fuel cells have been extensively developed into many different types, and direct alcohol fuel cells (DAFCs) are of interest as a potential power source because of their large power density, quick start, simplicity, and nearly zero emission. However, the high cost and poor catalytic efficiency of current catalysts are primary barriers to commercializing DAFCs. Designing advanced nanocatalysts for both anode and cathode electrodes is of crucial importance for practical DAFC development; however, a brief evaluation of current progress in electrocatalyst development for the alcohol oxidation reaction (AOR) and oxygen reduction reaction (ORR) is still very little. Herein, recent advances in fuel cell catalysts, mainly focusing on several most active areas (i.e., Pt‐ and Pt‐free‐based catalysts, metal‐free carbon, carbon‐based nonprecious metal composites) are concisely summarized. Also, challenges and prospects for DAFCs are highlighted to supply a comprehensive view for further designing high‐performance DAFC catalysts.

The Development of Catalysts in Ethanol Steam Reforming for Fuel Cells

Development in Catalytic Systems in Hydrogen Production via Ethanol Steam Reforming

Recent status in catalyst modification strategies for hydrogen production from ethanol steam reforming

From Steam Reforming of Ethanol at Low Temperature over , and Catalysts for Fuel-Cell Application

Progress on Methanol Reforming Technologies for Highly Efficient Hydrogen Production and Applications

Research progress in hydrogen preparation by reforming dimethyl ether steam for fuel cell

Technology of Hydrogen Sources for Fuel Cells--the Development of Hydrogen Production from Ethanol Reforming

Research Progress on Anode Catalyst for Direct Ethanol Fuel Cell

Review on Copper and Palladium Based Catalysts for Methanol Steam Reforming to Produce Hydrogen

A mini review on recent progress of steam reforming of ethanol

Methanol Reforming Processes for Fuel Cell Applications

A review of approaches for the design of high-performance electrocatalysts for ethanol electrooxidation

Hydrogen from steam reforming of ethanol in low and middle temperature range for fuel cell application

Current progress and performance improvement of Pt/C catalysts for fuel cells

Experimental and Subsequent Mechanism Research on the Steam Reforming of Ethanol over A Ni/Ceo2 Catalyst

Milestones of Electrocatalyst Development for Direct Alcohol Fuel Cells

Advanced Catalytic Materials for Ethanol Oxidation in Direct Ethanol Fuel Cells

Research and Development of Electrocatalysts Used in DMFC

Steam reforming of ethanol by non-noble metal catalysts

Recent Advances in Electrocatalysts for Proton Exchange Membrane Fuel Cells and Alkaline Membrane Fuel Cells

Interface synergism and engineering of Pd/Co@N-C for direct ethanol fuel cells