Abstract:In this study, one of the commonly used MXene (Ti3C2Tx) and β nucleated isotactic polypropylene (β-iPP)/MXene composites of different compositions were fabricated. The effects of MXene on non-isothermal crystallization and polymorphic behavior of β-iPP/MXene composites were comparatively studied. The non-isothermal crystallization kinetics indicates that for all samples, the lower cooling rates promote composites to crystallize at higher temperatures. When MXene and β-Nucleating agent (β-NA) are added separately, the crystallization temperature of composites shifts towards higher temperatures at all cooling rates. When MXene and β-NA are added simultaneously, the composite shows different cooling rate dependence, and the effects of improving crystallization temperatures is more obvious under rapid cooling. The activation energy of four samples iPP, iPP/MXene, iPP/β-NA, and iPP/MXene/β-NA were −167.5, −185.5, −233.8, and −218.1 kJ/mol respectively, which agree with the variation tendency of crystallization temperatures. The polymorphic behavior analysis obtained from Differential Scanning calorimetry (DSC) is affected by two factors: the ability to form β-crystals and the thermal stability of β-crystals. Because β-crystals tend to recrystallize to α-crystals below a critical temperature, to eliminate the effect of β-α recrystallization, the melting curves at end temperatures Tend = 50 °C and Tend = 100 °C are comparatively studied. The results show that more thermally unstable β-crystals would participate in β-α recrystallization with higher cooling rates. Moreover, thermal stability of β-crystals is improved by adding MXene. To further verify these findings, samples of three different thermal conditions were synthesized and analyzed by DSC, X-Ray Diffraction (XRD), and Polarized Light Optical Microscopy (PLOM), and the results were consistent with the above findings. New understandings of synthesizing β-iPP/MXene composites with adjustable morphologies and polymorphic behavior were proposed.

Crystallization Behavior and Dynamic Mechanical Properties of Poly(phenylene sulfide)/Nano-SiO_2 Composites

Isothermal Crystallization Behavior of Poly(Phenylene Sulfide)/Nano-SiO_2 Composites

Effect of Ti–SiO2 nanoparticles on non-isothermal crystallization of polyphenylene sulfide fibers

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Exploring the Effects of MXene on Nonisothermal Crystallization and Melting Behavior of Β-Nucleated Isotactic Polypropylene

Isothermal crystallization of polypropylene/surface modified silica nanocomposites

Crystallization and Mechanical Properties of Polypropylene Filled with Sio2 Nanoparticles

The Glass Transition Temperature of Poly(Phenylene Sulfide) with Various Crystallinities

Morphology, Crystallization and Dynamical Mechanical Behavior of Ipp/nano-Caco3composites

Computational Study of the Nanoscale Mechanical Properties of C-S-H Composites under Different Temperatures

In Situ Study of Nanostructure and Morphological Development During the Crystal–mesophase Transition of Poly(di-N-hexylsilane) and Poly(di-N-butylsilane) by X-ray and Hot-Stage AFM

A study on the synergetic effects of self/induced crystallization and nanoparticles on the mechanical properties of semi-crystalline polymer nanocomposites: experimental and analytical approaches

PDMS/TiO2 and PDMS/SiO2 Nanocomposites: Mechanical Properties' Evaluation for Improved Insulating Coatings

Preparation, characterization and thermal properties of the PS+Si based polymer nanocomposites

Effect of hydrophobic nano‐silica/β‐nucleating agents on the crystallization behavior and mechanical properties of polypropylene random copolymers

Molecular-dynamics study on the thermodynamic properties of nano-SiO2 particle-doped silicone rubber composites

Stretch-Induced Intermediate Structures and Crystallization of Poly(dimethylsiloxane): the Effect of Filler Content

Electrical Conduction and Dynamic Rheology of Multi-Walled Carbon Nanotubes and Hydrophobic Nanosilica-Filled Immiscible Poly(Methylmethacrylate)/Polystyrene Blends

Rational Design of Mesoporous Silica (SBA-15)/PF (Phenolic Resin) Nanocomposites by Tuning the Pore Sizes of Mesoporous Silica

Static and dynamic mechanical properties of polydimethylsiloxane/carbon nanotube nanocomposites

Modified Silicon Nitride Nanopowder Coating and Its Influence on the Dynamic Mechanical Property of Polymethyl Methacrylate Nanocomposite