Abstract:Introduction. The quality of the enrichment process is affected by many factors, ranging from the characteristics of the raw materials supplied to the enrichment plant to the enrichment technology and the agents used. Strict process control is required at all stages from mining to concentrate extraction. Copper-zinc ores of Russian deposits are difficult for enrichment due to high mass fraction of pyrite in ore and fine irregular intergrowth of sulfide minerals between themselves and with rock minerals. The practice of enrichment of copper-zinc ores has established that it is impossible to obtain high-quality zinc and pyrite concentrates without adding sphalerite flotation modifier agents to various flotation operations. To improve the flotation activity of sphalerite, copper sulphate is used as an activation additive in the enrichment process chain. Purpose of work. To study the effect of sulfhydryl collectors on flotation of sulfide minerals, and development of innovative technologies of flotation of copper-zinc and polymetallic ores considering the acidity of the environment. Materials and methods. In the experimental part of the work, several methods of materials and agents preparing were used, a variety of equipment was used, as well as methods of analysis and processing of results. The material composition and grain size distribution of sphalerite was studied using the MLA System Quanta. X-ray phase analysis of sphalerite was carried out at the University of science and technology "MISIS" in Research Laboratory of ultra-hard materials on Rigaku Geigerflex device using monochromatized CuKα-radiation. Thermographic studies were carried out using a Q -1500D derivatograph. The following flotation agents were used in the work: collector - butyl potassium xanthate, foam agent MIBC, medium regulator - lime, modifiers - iron sulfate, sodium sulphide and mixture of iron sulfate and sodium sulphide. Flotation experiments were carried out on the laboratory flotation machine FL-189 G. Results. The kinetics of sphalerite flotation is characterized not by a single value of the flotation kinetics constant for all flotation mineral grains, but by a set of such values corresponding to quite certain fractions of sphalerite extracted in the foams product. It has been found that in the initial period of flotation the mineral grains with a high value of the flotation velocity constant are flotated, and in the final period of flotation the grains of the same mineral with a low value of the same flotation velocity constant are flotated. Discussion. The introduction of iron (II) sulphate into the mineral slurry leads to a redistribution of the flocculated mineral between medium and lightly flocculated fractions. This indicates that iron (II) sulphate acts as an activator for sphalerite flotation. At a low flow rate of this agent, the proportion of medium flotable fractions increases and the proportion of easily and hardly flotable fractions decreases. With increase in the agent consumption up to 400 g/t and more, the opposite picture is observed - the proportion of medium flotable fraction decreases and the proportion of easily flotable fraction increases in flocculated sphalerite. The replacement of iron (II) sulphate by sodium sulphate has the opposite effect on the flotation spectrum of sphalerite. The introduction of a mineral suspension of a solution of sodium sulfide and iron (II) sulfate into the liquid phase at a consumption of 200 g/t of each agent leads to a decrease in the proportion of easily and especially medium floatable fractions of the mineral and an increase in the proportion of difficultly floatable fractions. Conclusions: 1. An increase in the pH of pulp liquid phase leads to a decrease in the extraction of zinc concentrate in the foam product during flotation with butyl xanthate. 2. The introduction of a solution of sodium sulfide with ferrous sulfate reduces the floatability of the mineral, which is reflected in a decrease in the extraction of zinc concentrate. 3. Sodium sulfide and iron sulphate, while simultaneously dosing them into the flotation pulp, act as depressants in the sphalerite flotation process. 4. Sodium sulfide depresses sphalerite at all studied pH concentrations. Resume. The results of the research can be useful in improving the methods for processing sulfide ores (lead-zinc and copper-zinc) which are included in the group of polymetallic ores. The developed methods of flotation processing make it possible to improve the quality of enrichment and increase the extraction of a valuable component.

Influence of excess sulfide ions on the malachite-bubble interaction in the presence of thiol-collector

New Insights into the Role of Thiol Collectors in Malachite Flotation

Effect of Sulfate Ions on Anodic Polarization Behavior of Nanocrystalline Copper Bulk

Effect of dissolved components of malachite and calcite on surface properties and flotation behavior

Surface modification of malachite with tetraamminecopper (II) and its effect on sulfidation flotation

Improved activation of malachite sulfurization flotation by thiourea's (CS(NH 2 ) 2 ): Performance and mechanism study

Selective modification of malachite with ammonium carbamate to promote flotation separation from calcite

Mechanistic insights into stepwise activation of malachite for enhancing surface reactivity and flotation performance

Effect of CuSO4 on sulfidized cerussite surface properties and its response to the flotation behavior

The effect of ferrous sulfate, sodium sulfide and their mixtures on the flotation of sphalerite in the alkaline medium

Relationship between Surface Characteristics and Floatability in Representative Sulfide Minerals: Role of Surface Oxidation

Influence of high concentration Zn2+ on floatability of sphalerite in acidic system

Flotation separation of chalcopyrite from molybdenite with sodium thioglycolate: Mechanistic insights from experiments and MD simulations

Improving separation of sphalerite and galena by surface oxidation behavior regulation using calcium lentisulfonate as depressant

Effects of Sodium Alginate on the Flotation Separation of Molybdenite From Chalcopyrite Using Kerosene as Collector

Effect of Sulfide Minerals on Degradation of Alkyl Xanthate

Adsorption characteristics of Cu2+ species on cerussite surfaces and implications for sulfidization flotation

Effect of seawater on flotation separation of sphalerite from pyrite

The Influence of Sulphide Tailing Water on the Flotation Performance of Pyrite

Effect of sodium silicate on the flotation separation of chalcopyrite and galena using sodium sulfite and sulfonated lignin as depressant