Abstract:The drag anchor is widely used in offshore engineering as a foundation for the mooring system due to high capacity and low cost. The prediction of kinematic behavior and trajectory is still challenging due to the complex interaction of the anchor fluke with soil. The existing plastic yield envelope method is generally used for the kinematic analysis, where the deep anchor failure is assumed to occur during the whole dragging process. In reality, the penetration is a process of anchor fluke being dragged into seabed soil continuously from shallow to deep depths. Obviously, the existing yield envelope method could not capture the effect of shallow anchor failure, which may lead to inaccurate prediction of the anchor trajectory. Finite element analyses were conducted firstly to obtain the influences of the anchor embedment depth and angle of the fluke on the drag anchor behaviors under unidirectional and combined loadings. The yield envelope for the shallow anchor failure was determined accordingly, with which the shallow failure effect can be taken into account for the yield envelop method. The effects of the fluke angle, the bearing capacity factor and the shallow zone size were investigated. The predicted trajectories with and without the shallow failure effect were compared. It is shown that the fluke angle and the shallow failure zone size influence significantly the kinematic behaviors and the trajectory of the drag anchor. The consideration of shallow failure results in a shallower predicted anchor embedment depth and a smaller anchor line force before the anchor penetration depth stabilizes, but hardly changes the ultimate embedment depth.

Analysis on Ultimate Pullout Bearing Capacity of Drag Embedment Anchor under Cyclic Loading

Behaviors of Drag Embedment Anchor in Layered Clay Profiles

Free-Fall Penetration Behaviors of A New Dynamically Installed Plate Anchor in Marine Clay

Centrifuge Modelling of Suction Anchor Subjected to Inclined Load in Soft Clay

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

Behavior of Drag Anchor under Uni-Directional Loading and Combined Loading

Numerical Investigations on Pore-Pressure Response of Suction Anchors under Cyclic Tensile Loadings

Model Tests on Penetration and Pullout of Suction Caissons in Silt

Field Tests of Offshore Driven Piles Subjected to Lateral Monotonic and Cyclic Loads in Soft Clay

Dynamic Installation Behaviors of A New Hybrid Plate Anchor in Layered Marine Clay

Field Experimental Study on Cyclic Uplift Behavior of Anchored Pier Foundations

Behavior of Drag Anchor in Clay with Linearly Increasing Shear Strength under Unidirectional and Combined Loading

Kinematic Analysis on Drag Anchor Installation in Clay Considering Shallow Failure Effects

Bearing Performance of a Novel Caisson-Plate Gravity Anchor

Load Transfer of Offshore Open-Ended Pipe Piles Considering the Effect of Soil Plugging

Dynamic Response of Offshore Open-Ended Pile under Lateral Cyclic Loadings

Dynamic Responses of Jacket Foundation Offshore Wind Turbine Considering the Cyclic Loading Effects

Inclined Loading Capacity of Caisson Anchor in South China Sea Carbonate Sand Considering the Seabed Soil Loss

Prediction of the whole mooring chain reaction to cyclic motion of a fairlead

An Improved Method of Predicting Drag Anchor Trajectory Based on the Finite Element Analyses of Holding Capacity

The Bearing Capacity of Torpedo Anchor in Clay under Inclined Loading of Mooring Chain