Abstract:Magnetic eddy current losses is significant in permanent magnet motors, especially in high-power density permanent magnet motors. It significantly affects the magnet’s temperature and properties and may cause irreversible demagnetization. Several methods for reducing magnetic eddy current losses is proposed to address these problems. First, a field-circuit coupled mathematical model was established to calculate the magnetic eddy current losses. Experiments on the phase current and magnetic eddy current losses verify the accuracy of field-circuit coupled mathematical model. Then based on the model, the effect of the trigger angle, slot opening width, pole arc coefficient, pole arc center offset, and auxiliary slots on the magnetic eddy current losses were assessed. The results showed that the magnetic eddy current loss could be reduced by choosing a suitable leading trigger angle, pole arc coefficient, and pole arc center offset. A smaller slot opening width reduced the eddy current losses. A novel auxiliary slot with an optimized size is proposed to reduce eddy current losses. Finally, taking the trigger angle, slot opening width, pole arc coefficient, pole arc center offset and the auxiliary groove as the optimization factors and the magnetic eddy current loss as the optimization target, the optimal parameter scheme is obtained by Taguchi method. The simulation results show that the optimized magnetic eddy current losses is reduced by 8.57%.

AC Loss in a High Speed BLPM Motor Considering Proximity Effect

Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines.

Analytical investigation of open-circuit eddy current loss in windings of PM machines

Analytical Model of Eddy Current Loss in Windings of Permanent-Magnet Machines Accounting for Load

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Influence on Rotor Eddy-Current Loss in High-Speed Pm Bldc Motors

Comprehensive Analysis of the AC Copper Loss for High Speed PM Machine With Form-Wound Windings

Influence of Rotor Structure on Rotor Eddy-Current Loss in High-Speed Permanent Magnet Brushless DC Motors

Reduction of Rotor Loss in High-Speed Permanent Magnet Motors by Design Method

Study on Electromagnetic Losses in High-speed Permanent Magnet Brushless Machines-the State of the Art

A Comprehensive Investigation of Winding Eddy and Circulating Current Losses of Stator Iron Coreless PMBLDC Motors

Loss Analysis of High Speed Permanent Magnet Synchronous Motor

Influence of Control Strategy on Stator and Rotor Losses in High-Speed Permanent Magnet Brushless Motors

Study on the Effect of Composite Sleeve on Rotor Loss of High-Speed PM BLDC

Analysis Of Ac Losses In High-Speed Permanent Magnet Motors Based On The Equivalent Modeling Method

AC Loss Analytic Method and Optimization of Litz Winding for High-Speed Electrical Machines

Investigation and Comparison of Different Calculation Methods for AC Copper Loss of Flat Copper Wire in Axial Flux Permanent Magnet Motor

Comparison of AC Losses in the Winding of Electrical Machines with Fixed Strands Positions, Fixed Conductor Shapes and Random Winding

Variable Coefficient Iron Loss Calculating Model Considering Rotational Flux and Skin Effect

Study on AC Copper Losses in an Air-Cored Axial Flux Permanent Magnet Electrical Machine with Flat Wires

Analysis of AC Loss in High-Speed Switched Reluctance Motor for Electric Vehicle Considering Winding Axial Transposition