Abstract:Camera calibration is an important part of high-precision optical measurement, which is especially difficult in the micro-nano field. Based on the integrated correlation calculation and CCD moire method, this paper describes the development of a lens calibration technique called the Integrated Colour CCD Moire Method (ICCM). The CCD moire fringes, formed by superimposing a periodic optical signal of a specimen grating with a CCD target array or a Bayer filter array, significantly enlarges the deformation modulated by lens distortion and the calibration plate attitude (i.e. the rotation angle relative to the camera coordinate system). To measure lens distortion using CCD moire, the deformation pattern that is governed by the lens distortion, specimen grating attitude and carrier was used to construct a CCD fringe image. If the constructed CCD fringe image based on the trial lens distortion and rotation angles have a maximum similarity to the captured CCD moire image, the lens distortion and rotation angles are correctly inversed. Particle swarm optimisation algorithm was selected to search for the true value so that the accuracy and robustness could be improved. Numerical experiments verified that the ICCM method developed in this work can simultaneously inverse the lens distortion, rotation angle and the grating pitch with high precision. The lens distortion of the metallographic microscope has been successfully characterised by the developed method with an 833 nm pitch grating. Simulations and experiments showed that ICCM is an intuitive, accurate, anti-noise and robust distortion calibration method. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

A New Method of Lens Distortion Calibration of Linear CCD Measurement System

Line Structured Light Calibration System Based on Planar Complementary Target

Estimating Radial Distortion for Fish-eye Lens Based on Collinear Constraint

Small Angular Displacement Measurement Based on an Autocollimator and a Common-Path Compensation Principle.

Calibration of Industrial Cameras Using Asymmetric Circle Center Projection

Planar Visual Metrology Using Partition-Based Camera Calibration

A Projector Calibration Method for Fringe Projection System

Linear fitting interpolation based on FOV division for correcting wide angle fish-eye lens distortion

Unified Optical Distortion Correction Method for Imaging Systems Using A Concise Geometrical Transformation Model

Partition-Based Camera Intrinsic and Extrinsic Parameters Calibration for Planar Visual Metrology

Calibration Method for High-Accuracy Measurement of Long Focal Length with Talbot Interferometry.

Calibration for the Errors Resulted from Aberration in Long Focal Length Measurement

Optical Distortion Evaluation Based on the Integrated Colour CCD Moire Method

A New Method of Calibrating the Camera Nonlinear Model

Application of protein misfolding cyclic amplification to detection of prions in anaerobic digestate.

Accuracy Evaluation of Optical Distortion Calibration by Digital Image Correlation

A Simple Method of Accurate Aberration in a Camera with Large Field Lens

DoF-Dependent and Equal-Partition Based Lens Distortion Modeling and Calibration Method for Close-Range Photogrammetry

Calibrating Method of Camera in Opto-Electronic System

3-D Positioning System Based on Linear CCD Camera

Assessment and Correction of Lens Distortion for Digital Image Correlation