Abstract:In this paper, a novel magnetohydrodynamic attitude adjustment method is proposed, which only uses a spherical magnetohydrodynamic attitude controller for three-axis attitude adjustment. The electromagnetic field equations and fluid flow equations are simultaneously solved using a finite volume method. The purpose of the simulation is to analyze the influences of changing parameters of geometric design of the proposed mechanism on the magnetic field distribution, flow field distribution, angular momentum, and output torque. Also, the influences of different numbers of poles and slots on the magnetic field distribution, flow field distribution, and attitude adjustment parameters are studied. It was found that the magnetic induction intensity, fluid velocity, angular momentum, and torque produced by the electromagnetic actuator with 4 poles and 24 slots are almost the largest in the proposed mechanism. Therefore, 4 poles and 24 slots are selected as the design parameter of the electromagnetic actuator. Furthermore, the magnetic field distribution, flow field distribution, angular momentum, and the output torque in four different fluid domains are studied. It was found that the angular momentum increases with the increase in the range of flow field. However, for a certain range of flow, the increase in angular momentum is minimum. In addition, the output torque produced by the fluid does not change basically with the flow field range. According to the numerical results, a combination of pole and slot numbers and the range of flow field are proposed for the physical design of the proposed mechanism. Note that this study can provide a reference for the optimal design of the proposed mechanism. Key words: Magnetohydrodynamic, fluid momentum controller, numerical simulation, angular momentum, output torque. Tables 3, Figs 20, Refs 22.

The Design of A Circular Controller Based on Electromagnetic Drive Technology

Design And Dynamic Analysis Of A Micro Three-Axis Turntable

Overview of Attitude Detection and Control of Multi-degree-of-freedom Spherical Ultrasonic Motor

Experiments on the Active Control of Circular Disk Vibration

Modeling and Design of a 3-DOF Magnetic Bearing with Toroidal Radial Control Coils

Evolutionary Design Of Controllers With Optimized Structure And Its Application In A Maglev Ball Control System

Control of a BLDC Motor for Electromechanical Cctuator

Contouring Control of Linear Motor Direct-Drive X-Y Table Via Chattering-Free Discrete-Time Sliding Mode Control

Circular Trajectory Motion Control of an Inspection Spherical Robot

Attitude Controller Design for Larger Angle Maneuver Based on Similar Skew-symmetric Structure

A Structure Simple Controller for Satellite Attitude Tracking Maneuver

Design And Control Of The Precise Tracking Bed Based On Complex Electromechanical Design Theory

Design of A Control System for A Maglev Planar Motor Based on Two-Dimension Linear Interpolation

Design of Attitude Controller Without Angular Velocity Measurement of Flexible Spacecraft

Technology of Direct Drive for Permanent Magnet Synchronous Linear Motor Control

Periodic Time-Varying Controller Design of a Satellite Using Magnetorquers

NUMERICAL SIMULATION OF THE INFLUENCE OF GEOMETRIC PARAMETERS ON A SPHERICAL MAGNETOHYDRODYNAMIC ATTITUDE CONTROLLER

Design of controller for spacecraft attitude large angle maneuver with three reaction wheels

Design and Analysis of MHD-based Momentum Ring for Satellite Attitude Adjustment

Precision LARC Motion Controller Design for a Magnetically Levitated Planar Motor

Design and Simulation of the Direct Drive Servo System