Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Finite Element Analysis and Structure Optimization of the Multipole Axial Flux Reluctance Resolver

The Finite Element Analysis and Parameter Optimization of the Axial Flux Variable- Reluctance Resolver with Short Pitch Distributed Winding

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

The Analysis of Multipole Axial Flux Reluctance Resolver with Sinusoidal Rotor

Optimization analysis of an axial flux reluctance resolver with short pitch distributed windings

The principle of reluctance resolver and EMF waveform optimization based on FEM

Harmonic Analysis Of Linear-Rotor Axial Reluctance Resolver

A Novel Axial Reluctance Resolver Proposal and Its Winding Configuration Optimization Using Winding Function Method

Electromagnetism Principle of the Coarse-Exact Coupling Variable-Reluctance Resolver

Improved Configuration Proposal for Axial Reluctance Resolver Using 3-D Magnetic Equivalent Circuit Model and Winding Function Approach

Design and Optimization of Novel Doubly-Fed Consequent-Pole Flux Reversal Machine

The analysis for new axial variable reluctance resolver with air-gap complementary structure

The parameter design and calculation for axial-flux resistance resolver

The Decoupling Study on the Dual-Channel Radial Flux Reluctance Resolver with Common Magnetic Circuit

Design and Optimization of A Novel Linear Reluctance Resolver

The Effects of Stator and Rotor Eccentricities on Measurement Accuracy of Axial Flux Variable-Reluctance Resolver with Sinusoidal Rotor

Optimization of Stator Structure for Improved Accuracy in Variable Reluctance Resolvers Using Advanced Machine Learning Techniques

Optimization and Comparison of C-Core and E-Core Linear Switched-Flux Pm Machines with Odd Primary Poles

Design and Analysis of Electric-Excitation Claw-Pole Field-Modulated Machine Considering Effective Harmonics

Simulation and Experimental Study on Influence of Coil Positions on Accuracy of Variable Reluctance Resolver

Analysis of Novel Variable Reluctance Resolver with Asymmetric Teeth on the Stator