Abstract:Wireless networks are built upon a shared medium that makes it easy for adversaries to launch jamming-style attacks. These attacks can be easily accomplished by an adversary emitting radio frequency signals that do not follow an underlying MAC protocol. Jamming attacks can severely interfere with the normal operation of wireless networks and, consequently, mechanisms are needed that can cope with jamming attacks. In this paper, we examine radio interference attacks from both sides of the issue: first, we study the problem of conducting radio interference attacks on wireless networks, and second we examine the critical issue of diagnosing the presence of jamming attacks. Specifically, we propose four different jamming attack models that can be used by an adversary to disable the operation of a wireless network, and evaluate their effectiveness in terms of how each method affects the ability of a wireless node to send and receive packets. We then discuss different measurements that serve as the basis for detecting a jamming attack, and explore scenarios where each measurement by itself is not enough to reliably classify the presence of a jamming attack. In particular, we observe that signal strength and carrier sensing time are unable to conclusively detect the presence of a jammer. Further, we observe that although by using packet delivery ratio we may differentiate between congested and jammed scenarios, we are nonetheless unable to conclude whether poor link utility is due to jamming or the mobility of nodes. The fact that no single measurement is sufficient for reliably classifying the presence of a jammer is an important observation, and necessitates the development of enhanced detection schemes that can remove ambiguity when detecting a jammer. To address this need, we propose two enhanced detection protocols that employ consistency checking. The first scheme employs signal strength measurements as a reactive consistency check for poor packet delivery ratios, while the second scheme employs location information to serve as the consistency check. Throughout our discussions, we examine the feasibility and effectiveness of jamming attacks and detection schemes using the MICA2 Mote platform.

An Evaluation Method of Communication Jamming Effectiveness Based on Jamming Reliability

The Interference Effect Evaluation Indicators of Radar Based on Penetration Path

The Feasibility of Launching and Detecting Jamming Attacks in Wireless Networks.

An Electronic Jamming Method Based on a Distributed Information Sharing Mechanism

On Adjusting Power to Defend Wireless Networks from Jamming

Anti-jamming Timing Channels for Wireless Networks

An Error-Minimizing Framework for Localizing Jammers in Wireless Networks

Determining the position of a jammer using a virtual-force iterative approach

Evaluation Research of Communication Jamming Effectiveness in Training of Electronic Countermeasure

A New Electronic Jamming Method Inspried from Bionics System

Exploiting Jamming-Caused Neighbor Changes for Jammer Localization

Error minimizing jammer localization through smart estimation of ambient noise

A New Method for Evaluation of Jamming Effect on ISAR

Eavesdropper-Tolerance Capability in Two-Hop Wireless Networks Via Cooperative Jamming.

Analysis of error rates and capacity outage of wireless links under jamming and multipath signal fading

On The Jamming Power Allocation And Signal Design In Df Relay Networks

Jamming-Resistant Communication in Multi-Channel Multi-hop Multi-path Wireless Networks.

Measurement and evaluation method of radar anti-jamming effectiveness based on principal component analysis and machine learning

The Robust Communication Method Against Dependent Jamming Based on Convex Hull in Communication Countermeasures

Characterization of anti-jamming effect on the Joint Tactical Information Distribution System (JTIDS) operating in complicated electromagnetic environment

Jamming Modulation: An Active Anti-Jamming Scheme