Abstract:Aiming at the wedge friction damper for freight train bogie, considering Dankowicz dynamic friction, the mechanical model of a three-degree-of-freedom inclined impact vibration system with gap and dynamic friction, is simplified. The mechanical model of the system is established, the motion equation of the system is obtained, and the motion state and conditions of the system are analyzed. The Poincare map is constructed by selecting a fixed collision section, and the response of the system is solved by the fourth-order Runge-Kutta numerical method with variable step size. The transition process of the system motion and the phenomenon of sticking and chatter are analyzed by numerical simulation when the external excitation frequency changes. The results show that: 1) Under certain parameters, with the change of excitation frequency, the system undergoes periodic doubling bifurcation, inverse periodic doubling bifurcation, Grazing bifurcation and Hopf bifurcation, and there is a "periodic bubble" phenomenon in the system motion. When the system excitation frequency is between 3.35–3.55, 4.425–6.12, and 7.34–7.758, the system motion has chatter and sticking phenomena; when the system excitation frequency is between 1.75–3.24 and 3.92–4.425, the sticking phenomenon disappears, and only the chatter phenomenon exists. 2) When other parameters remain unchanged, and the mass ratio decreases from 1.15 to 0.85, nonlinear dynamic phenomena such as the transition between periodic bubbles and chaotic bubbles will be found. In this paper, the bifurcation and chaos characteristics of the impact vibration system of the wedge friction damper are studied, and the rich friction-induced vibration forms such as chatter and sticking are revealed, which provides a reference for improving the stability of vehicle operation and the selection of parameters in vehicle vibration reduction design in engineering practice.

The Stick-Slip Vibration Analysis of Non-Rotary Body Induced by Rotary Friction

Approximately Analytical Procedure to Evaluate Random Stick-Slip Vibration of Duffing System Including Dry Friction

Stick-slip vibration analysis and vibration frequency extraction of coke pushing system

Contact Friction Induced Vibration between Revolute and Non-Revolute Bodies

Simulation analysis on influential factors of stick-slip

Dynamics of a three-module vibration-driven system with non-symmetric Coulomb’s dry friction

Stick-slip effect in a vibration-driven system with dry friction: Sliding bifurcations and optimization

Series Solution of Symmetric Dry Frictional Stick-Slip Motion and Stick-Slip Boundary Characteristics

Stick-Slip Motion of A Resin-Steel Contact at Low Speeds

Forced Vibration Analysis of Beams with Frictional Clamps

Investigating different friction models for the stick‐slip effect with nodal contact

THE MOTION STABILITY ANALYSIS OF A ROTATING BEAM WITH A RIGID BODY ON ITS END

Dynamic analysis of planar mechanical systems considering stick-slip and Stribeck effect in revolute clearance joints

Series solution of double-stick motion response of dry friction oscillator and stick-slip boundary analysis

Oblique impact dynamic analysis of wedge friction damper with Dankowicz dynamic friction

Modeling and Analysis on Stick-slip Friction Course of Spherical Micromanipulator

Model generation and parametric study of stick-slip induced vibration for mechanics under friction

Stick-Slip Transition Appearing in A Disk-Ball System

Non-stationary friction-induced vibration with multiple contact points

Analyzing Resonant Response of a System with Dry Friction Damper Using an Analytical Method

SLIDING BIFURCATIONS OF RECTILINEAR MOTION OF A THREE-PHASE VIBRATION-DRIVEN SYSTEM SUBJECT TO COULOMB DRY FRICTION