Abstract:Labyrinth seals represent an important flow element in the sealing equipment of modern turbomachinery industries. The straight-through and stepped labyrinth seal are widely used in modern steam turbine due to their comparable simple structure and low manufactured costs. The influence of pressure ratio and fin pitch on the leakage flow characteristics of the straight-through and stepped labyrinth seals is numerically determined. The pressure ratio is defined as the outlet static pressure divided by the inlet total pressure. The fin pitch varied in the fixed axial distance of the labyrinth seal. The geometries investigated represent designs of the straight-through and stepped labyrinth seal typical for modern steam turbines. The leakage flow fields in the high rotating straight-through and stepped labyrinth seals are obtained by the Reynolds-Averaged Navier-Stokes solution using the commercial software FLUENT with the fixed seal clearance and fins geometrical structure. The effect of the rotational axis is also taken into account in numerical computations. Numerical simulations covered a range of pressure ratio and fin pitch for the straight-through and stepped labyrinth seals. Dimensionless discharge coefficients, describing the sealing performance, are calculated from the simulation results. The numerical results show that pressure ratio and fin pitch both affects the sealing performance with the fixed seal clearance and fin geometrical structure. The leakage flow rate decreases with the decreasing fin pitch for both the straight-through and stepped labyrinth seal at the fixed pressure ratio. Furthermore, the leakage flow rate decreases with the increasing pressure ratio at the fixed fin pitch for two kinds of labyrinth seals in the present study. This research provides technical support for improved design of labyrinth seals in turbomachinery.

A Review of Sealing Technologies in Turbomachinery

A Review of Flow and Heat Transfer, Mechanical Characteristics of Brush Seals

State-of-the Art of Turbomachinery Damper Seals Technology and Their Rotordynamic Characteristics

Experimental Study on Dynamic Sealing Performance under High Pressure and High Speed

Research Progress of Leakage Flows in Flow Passage of Axial Turbomachinery and Their Flow Controlling Technology

Research of the Brush Seal Technique and Its Application in Steam Turbine Optimization Design

REVIEW OF THE DISCHARGE, HEAT TRANSFER AND ROTORDYNAMIC CHARACTERISTICS OF HONEYCOMB SEALS

Research Status and Development Trend of Cylindrical Gas Film Seals for Aeroengines

Study On Leakage In Labyrinth Seals System Of A Turbine

Investigation into the Flow Behavior of Multi-Stage Brush Seals

Effects of Pressure Ratio and Sealing Clearance on Leakage Flow Characteristics in the Rotating Honeycomb Labyrinth Seal

Numerical Investigation on Labyrinth Seal Leakage Flow and Its Effects on Aerodynamic Performance for a Multistage Centrifugal Compressor

Review of investigation into internal flow of turbomachinery

Investigations on the Discharge and Total Temperature Increase Characteristics of the Labyrinth Seals with Honeycomb and Smooth Lands

Numerical Investigations on Leakage Performance of the Rotating Labyrinth Honeycomb Seal

Simulation and Flow Analysis of the Hole Diaphragm Labyrinth Seal at Several Whirl Frequencies

Study on seal improvement and rotor thrust control of centrifugal compressor

Experimental And Numerical Investigations On The Leakage Flow Characteristics Of The Labyrinth Brush Seal

Numerical study of leakage flow characteristics in hybrid brush seal

Experimental and Numerical Investigations on the Leakage Flow Characteristics of Labyrinth Seals

Numerical Investigation on Flow Characteristics and Aerodynamic Performance of Shroud Seal in a Supercritical CO2 Axial-Flow Turbine