Effect of Phase Composition and Microstructure on the Corrosion Resistance of Ni-Al Intermetallic Compounds
Jing Wen,Hongzhi Cui,Na Wei,Xiaojie Song,Guosong Zhang,Canming Wang,Qiang Song
DOI: https://doi.org/10.1016/j.jallcom.2016.11.138
IF: 6.2
2016-01-01
Journal of Alloys and Compounds
Abstract:Ni-Al intermetallic compounds synthesised by a vacuum melting method, designed with different composition and microstructure and corresponding to molar ratios of Ni: Al = 1:1, 2:1 and 3:1, respectively, were investigated. The phase constitution, microstructure, morphology, and corrosion resistance of products were analysed. The results show that single NiAl and Ni3Al phases are obtained with composition corresponding to Ni: Al = 1:1 and Ni: Al = 3:1, respectively, while with the molar ratio of Ni: Al = 2:1, the phases of the product are composed of Ni3Al and small amounts of NiAl. The corrosion morphology of Ni: Al = 1:1 and Ni: Al = 3:1 present dendritic structures due to the preferential corrosion of grain boundaries. In addition, stacked layers of laminated structures and even structures created by flaking are formed in the corrosion process. However, in the sample with a molar ratio of Ni: Al = 2:1, Ni3Al with a large number of radial and chrysanthemum-like microstructures serve as anodes, and NiAl with lath-shaped microstructures serve as cathodes. This exacerbates the grain boundary corrosion and causes the fast anodic dissolution of Ni3Al. Moreover, the corrosion resistance of Ni-Al intermetallic compounds are in the order of Ni: Al = 1:1 > Ni: Al = 3:1 > Ni: Al = 2:1. In conclusion, single phase and homogeneous microstructures can improve corrosion resistance. (C) 2016 Elsevier B.V. All rights reserved.