Abstract:To solve the contact/impact problem of flexible bodies in arbitrary shape, the finite element method is widely used to discretize the contact bodies. In the finite element method, two contact models are mainly used to compute the contact force, i.e., penalty function method and additional constraint method, which are different in constraint imposition strategy. The penalty function method regards the contact effect as a force function of local penetration at the contact point and its rate. This method has gained significant popularity because it does not bring extra dimensions to the dynamic equations and does not need to solve constraint equations either. However, as the non-penetration constraint is not precisely satisfied in the contact process when using the penalty function method, the accuracy of the numerical simulation depends on the choice of the penalty parameter. On the other hand, the additional constraint method can strictly satisfy the contact constraint condition by introducing the Lagrange multipliers into the dynamic equations, but the method poses some numerical difficulties due to the additional effort required to solve the multipliers. Considering the advantages and disadvantages of the two contact methods, the interactive mode method is proposed. This method divides the whole model into local static module and main dynamics module. The static module establishes a local finite element model of the contact region to compute the contact force, and the main dynamics module is used to obtain the kinematic variables of the whole body. In the simulation, the two modules are coupled by exchanging displacements and forces in each time step. In the current integration step, the main dynamics module provides the displacements of the boundaries of the local contact region at first, the values are transferred to the local finite model to compute the contact force next, and then the contact force is fed back to the dynamics module for the calculation of the next step. The proposed method combines the advantages of both the additional constraint method and the penalty function method, in which not only the artificial selection of penalty parameter is avoided, but also the non-penetration constraint of local contact region is satisfied and the numerical solution is convenient. The validity of the proposed method is verified by the comparison between simulation results and experimental results of a rod-plate impact case. Furthermore, a multi-point impact problem of a slider sliding in the gap chute is presented to validate the proposed method of dealing with the general impact problem.

Applicability Analysis on Impact Models of Flexible Bodies Considering Damping

Dynamic Modeling of a Flexible Multibody System with Elastic Impact

Investigation on Modeling Theory and Experiment Technique for Flexible Multi-body System with Multiple-point Impact

Geometric Nonlinear Effects on the Planar Dynamics of A Pivoted Flexible Beam Encountering A Point-Surface Impact

Global Impact Dynamic Modeling and Verification of A Flexible Beam with Large Overall Motion

THE OBLIQUE IMPACT DYNAMIC STUDY FOR[1mm］A FLEXIBLE BEAM UNDERGOING LARGE OVERALL MOTION

Numerical and experimental studies on impact dynamics of a planar flexible multibody system

The Structural Flexibility Effects on the System Impact Dynamics

Physical Essence and Influence of Model Parameters on Dynamic Response of Rayleigh Damping

Transient Impact Response Analysis of an Elastic–plastic Beam

Several Dynamic Models of A Large Deformation Flexible Beam Based on the Absolute Nodal Coordinate Formulation

Analysis model for long-span isolated structure subjected to multi-support earthquake excitations

DYNAMIC MODELING AND EXPERIMENT TECHNIQUE FOR A FLEXIBLE BEAM WITH CYLINDRICAL CONTACT

Drop Impact Analysis of Cushioning System with an Elastic Critical Component of Cantilever Beam Type

Dynamic Modeling Method of Flexible Bodies with Contact/impact Based on Interactive Mode

Dynamics modeling and numerical simulation for a rigid-flexible coupling multibody system

Investigation on Rigid-Flexible Coupling Dynamics for Elasto-Plastic Beam with Large Deformation

A novel approach to the dynamic response analysis of Euler-Bernoulli beams resting on a Winkler soil model and subjected to impact loads

Rigid-flexible Coupling Dynamics Analysis for Flexible Beam with Large Deformation and Applied with Thermal Load

A New Subregion Mesh Method for the Investigation of the Elastic-Plastic Impact in Flexible Multibody Systems

Impact Response of Elastic and Elastic-Plastic Sandwich Beams