THE OBLIQUE IMPACT DYNAMIC STUDY FOR[1mm］A FLEXIBLE BEAM UNDERGOING LARGE OVERALL MOTION

Caishan Liu,Bin Chen

DOI: https://doi.org/10.3321/j.issn:0459-1879.2000.04.009

IF: 3.5

2000-01-01

Acta Mechanica Sinica

Abstract:The key to solve the impact question during in flexible multi-bodysystems is to correctly establish the impact-contact model. S.Dubowskey［13］ provides a “impact pair model” to study the impactoccurring in mechanisms due to clearances at different joints. ChenBin［4,5］ adopted the similar model to research the dynamicbehavior of the space deployable mechanisms containing joint clearancesthrough numerical simulations and experiments. But the ``Impact pairmodel'' assumed a linear viscous damping law and a Hertzian spring formodeling the contact forces and the damping forces in impact surfaces,so this model can not be satisfied with the boundary condition incontact areas. 　　A spring-dashpot models, which can be contented with the contactboundary condition, is developed by Wang & Lee［6］. The efficiencyof this models is also testified through experiments, but the model isonly suited to the normal impact situation. 　　When oblique impact occurred between in multi-body systems, the frictioneffects on impact process is considered directly by using the slidingfriction theory in traditional impact model. 　　For correctly estimatingthe friction effects on oblique impact process, a tangential impactmodel should be studied to describe the stick phenomenon due to thetangential velocity reversing its direction. 　　For correctly establishingthe contact-impact model in oblique impact process, this paper adoptedthe spring-dashpot models to describe the normal impact process whichsatisfied with the contact boundary condition, the tangential movementin impact process is described by a tangential impact model whichadopted a linear contact stiffness in tangential direction to considerthe effects of friction force. 　　For a flexible beam undergoing large overall motion impacting a fixedslope surface under the effects of gravity, a contact condition isdescribed by using the displacement relationship between the tip offlexible beam and the fixed slope surface in the normal direction. Thesystem dynamic equations of consistent linearization which includingimpact process are derived using the mode assumption method.Furthermore, the algorithms suited to the oblique impact are alsopresented in this paper. 　　The dynamic property of the flexible beamduring oblique impacting process is minutely studied through an example,and the validity of the theories and the algorithms established in thispaper is also testified by a numerical simulation example.