Abstract:In the DIII-D tokamak, one of the most powerful techniques to control the density, temperature and plasma rotation is by eight independently modulated neutral beam sources with a total power of 20MW. The rapid modulation requires a high degree of reproducibility and precise control of the ion source plasma and beam acceleration voltage. Recent changes have been made to the controls to provide a new capability to smoothly vary the beam current and beam voltage during a discharge, while maintaining the modulation capability. The ion source plasma inside the arc chamber is controlled through feedback from the Langmuir probes measuring plasma density near the extraction end. To provide the new capability, the plasma control system (PCS) has been enabled to change the Langmuir probe set point and the beam voltage set point in real time. When the PCS varies the Langmuir set point, the plasma density is directly controlled in the arc chamber, thus changing the beam current (perveance) and power going into the tokamak. Alternately, the PCS can sweep the beam voltage set point by 20kV or more and adjust the Langmuir probe setting to match, keeping the perveance constant and beam divergence at a minimum. This changes the beam power and average neutral particle energy, which changes deposition in the tokamak plasma. The ion separating magnetic field must accurately match the beam voltage to protect the beam line. To do this, the magnet current control accurately tracks the beam voltage set point. These new capabilities allow continuous in-shot variation of neutral beam ion energy to complement the discontinuous “on or off” modulation method presently used to control average beam power and torque input.

Control System Based on Fuzzy-Neural Network for Current Beam from Cold Cathode PIG Ion Source

Design of EBW Stabilized High-Voltage Source Based on Fuzzy PID Control

Fuzzy-PID-neuron control for feed preheating plant

Fuzzy neural network control of tcsc

The Fuzzy Control System on Target Power Supply of a Vacuum Film Coating Machine

Design of a Low Level Radio Frequency Control System for the Direct Current-Superconductive Photocathode Injector at Peking University

Design of a hybrid adaptive fuzzy and neural network controller for nonlinear laser alloying process.

New Automatic Regulation System of Electron Beam Welder Cathode Heating Source

Design concept of intelligent Integrated Control System for Neutral Beam Injection

MTCA.4-based LLRF Control System for the C-ADS Proton Linac Injector I

An Automatic Temperature Control System with Self-Tuning Parameters Based on Fuzzy-PID

Reactor power control performance improvement based on fuzzy neural network of a small pressurized water reactor

Temperature modeling and control of Direct Methanol Fuel Cell based on adaptive neural fuzzy technology

Control System Of A Low-Energy High-Current Ion Beam Transport Test Bench

[The Control Method Design of Thermal Treatment System Via Fuzzy Logic].

Fuzzy Control of Carbon Dioxide Short Circuit Transfer Welding Based on Reducing Dependence of Operating Skills

Research on Pulsed MIG Welding Power Supply Based on The Fuzzy Self-Adaptive PID Control

High-Precision Semiconductor Laser Current Drive and Temperature Control System Design

A Fuzzy Control Approach For The Coordinated-Level Control Of The Modular-Htgr-Based Nuclear Steam Supplying System

Artificial Neural Networks Based Fuzzy Control Of Proton Exchange Membrane Fuel Cells

Advanced control of neutral beam injected power in DIII-D