Abstract:Active noise control (ANC) technique has been successfully implemented by various automotive manufacturers to interior powertrain noise cancellation and/or sound management. For the powertrain noise control, the ANC system only requires one reference signal (typically using tachometer signal) due to the fact that the powertrain response is functionally related to the engine rotational speed. Instead, the multi-reference ANC system is often required for the road noise control since the multiple-coherence between the reference accelerometer signals and the target noise must be guaranteed to yield an acceptable control performance. However, the adoption of traditional multi-reference filtered-x least mean square (FXLMS) algorithm for road noise ANC often leads to a large computational burden and slow convergence rate due to the long length of adaptive filter and a huge dynamic range of the filtered reference signal. To address these problems, road noise ANC systems configured with the time-frequency domain FXLMS (TF-FXLMS) algorithm and subband FXLMS (SFXLMS) algorithm are developed, where the adaptive algorithm either calculates the gradient estimate and filtered reference signal in the frequency domain or subband frequency domain to reduce the computational requirement and also updates the control signals in the time domain to avoid delay in the reference path. Then, a comprehensive computational complexity analysis is conducted to exhibit the computational cost for different algorithms. The effectiveness of the different algorithms will be demonstrated through an ANC system with eight accelerometers, one secondary loudspeaker, and one error microphone in the driver side to control actual road noise.

Active Noise Control Technology of Air Auxiliary System in Fuel Cell Vehicles

Study on Active Noise Control of Blower in Fuel Cell Vehicle under Transient Conditions

Control and path analysis of airborne noise of fuel cell vehicle

An Experimental Study on Noise Sources Identification for Fuel Cell Vehicle

Active Control of Noise in Vehicle Cabins

Nvh Research Based on Fuel Cell Vehicle

Study On Adaptive Active Control Of Unstable Noise In Vehicle

Active Noise Control Technology and Application on Automobile Cabin Noise

Overview of the Research of Noise of Air Supply System in Fuel Cell Cars

Noise Reduction Based on the Frame Improvement of Air-Condition of Fuel Cell Vehicle

A Modified Feedforward Hybrid Active Noise Control System for Vehicle

Reduction of Noise in Chinese Y-7 Aircraft Using Active Noise Control (ANC)

Multi-Reference Time-Frequency Active Control of Vehicle Interior Road Noise

Research on the Active Noise Control Technology for the Reduction of the Air Conditioner Noise in a Vehicle Cabin

Interior Noise Evaluation and Noise Source Identification of a Fuel Cell Vehicle Based on Psychoacoustic Parameters

Active Control of Vehicle Powertrain Noise Using Adaptive Notch Filter with Inverse Model LMS Algorithm

Experimental Analysis and Control to the Rear Interior Noise of the Fuel Cell Vehicle

Prediction and Control of Structure-borne Noise for Fuel Cell Vehicle Based on FEM/BEM

Adaptive parallel filter method for active cancellation of road noise inside vehicles

Interior Noise Prediction Based on Application of Acoustic-Structure Coupled Model of FCV

Active Control of Vehicle Transient Powertrain Noise Using A Twin-Fxlms Algorithm