Abstract:As a promising treatment technology for wastewater, the promotion of membrane bioreactors (MBR) is restricted by biological fouling. Among the measures used to mitigate membrane fouling, the addition of powdered activated carbon (PAC) to MBRs has been recognized as an effective practice. However, the effects of PAC dosage on the performance of MBRs that treat highly biochemical influent from wastewater treatment plants remain unclear. In this study, by investigating the treatment of biochemical tailwater by PAC–MBRs, we thoroughly analyzed the effects of PAC dosage on the contamination removal efficiency, membrane operation cycles, sludge mixture properties, and microorganism distributions. The results indicated that the addition of PAC enhanced the removal efficiency of MBRs depending on the contaminant of interest. For example, the removal efficiency of total nitrogen can be boosted from 30 % to 60 % with PAC addition, while the removal efficiencies of total phosphorus were comparable with or without PAC addition. Furthermore, the application of PAC in MBRs can prolong the duration of membranes by suppressing biological fouling. This was supported by the decreased microbial products, reduced smaller solid particles, and stronger stability of sludge particles. PAC addition also boosts the proportion of Proteus and decreases the proportion of Bacteroides , which helps to improve the removal efficiencies of contaminants. Finally, among the PAC dosages tested in our study, 1.5 g/L PAC was proposed as the optimal candidate for treating highly biochemical influents. For example, the corresponding time for transmembrane pressure to reach 0.03 MPa was 19 d at 1.5 g/L PAC, while these periods were 7 and 14 d at dosages of 0 and 0.5 g/L, respectively. Overall, the findings of this study will aid in the selection of optimal dosages for other systems with different types of influents.

Study on the influence of coagulant on microbial property of sludge in the fluidized-pellet-bed bioreactor

Results of Adding Sludge Micropowder for Microbial Structure and Partial Nitrification and Denitrification in a Filamentous AGS-SBR Using High-Ammonia Wastewater

Influence of Polyaluminum Chloride on Microbial Characteristics in Anaerobic Membrane Bioreactors for Sludge Digestion.

Understanding the effect of residual aluminum salt coagulant on activated sludge in sequencing batch reactor: Performance response, activity restoration and microbial community evolution

Using Polyaluminum Chloride and Polyacrylamide to Control Membrane Fouling in A Cross-Flow Anaerobic Membrane Bioreactor

Effects of Microbiological Diversity in the Anoxic-Oxic-settling-anaerobic Process Strengthened by Humic Biological Composite Fillers

Effect of trace amounts of polyacrylamide (PAM) on long-term performance of activated sludge

Using inorganic coagulants to control membrane fouling in a submerged membrane bioreactor

The effects of powdered activated carbon or ferric chloride on sludge characteristics and microorganisms in a membrane bioreactor

The Performance of Hybrid Anaerobic Membrane Bioreactors (AnMBRs) Added with Powdered Activated Carbon (PAC) Based on Different Sludge Retention Times

Powdered Activated Carbon - Membrane Bioreactor (PAC-MBR): Impacts of High PAC Concentration on Micropollutant Removal and Microbial Communities

Effect of powdered activated carbon dosage on sludge properties and membrane bioreactor performance in a hybrid MBR-PAC system

Effects of powdered activated carbon dosage on the performance of membrane bioreactors treating biochemical tail water

Short-Chain Fatty Acids Production from Anaerobic Fermentation of Sewage Sludge: The Effect of Higher Levels Polyaluminium Chloride

Revisiting the effects of powdered activated carbon on membrane fouling mitigation in an anaerobic membrane bioreactor by evaluating long-term impacts on the surface layer.

Identification and characterization of core sludge and biofilm microbiota in anaerobic membrane bioreactors

In-Situ Sludge Reduction in Membrane-Controlled Anoxic-Oxic-Anoxic Bioreactor: Performance and Mechanism

Synergistic role of powdered activated carbon (PAC) for aerobic granular sludge (AGS) formation and organic micropollutant (OMPs) removal

Effect of anaerobic COD utilization on characteristics and treatment performance of aerobic granular sludge in anaerobic/anoxic/oxic SBRs

COD removal from expanded granular sludge bed effluent using a moving bed biofilm reactor and their microbial community analysis

Optimization of membrane bioreactors by the addition of powdered activated carbon.