Abstract:In order to improve the outdoor exposure performance of laminated bamboo, boric acid/borax and UV absorbents, including triazole (UV1130), nano–TiO2, and nano–SiO2, were used to modify waterborne polyurethane (WPU) coatings, respectively. The physical and chemical properties of the coatings with and without modification were evaluated by adhesion strength, contact angle, wear, and temperature-resistance experiments. The antimildew properties of the coatings were evaluated by the bacteriostatic zone method, and the pyrolysis characteristics were investigated through TG–FTIR analysis. The results showed that, when compared with the unmodified WPU coating, the coatings with different modifications had stronger wear resistance; the mass loss of the best C4 coating was only 0.0078 g, which was 0.0203 g less than that of the unmodified C0 coating. However, when compared to the unmodified coating, the wettability of the modified coating increased to different degrees, and the contact angle of the C4 coating with the most obvious effect was only 36.50°. During the curing process of the modified coatings, the UV absorbents and boric acid/borax would interact with the C–N, C–O, and C=O bonds in the coating and change the molecular structure of the WPU. The thermal stability of the coatings with different modifications was enhanced. The best result, a 76.27% weight loss, was observed in the modified coating with boric acid/borax and 1.0% nano–TiO2. Different modified coatings had a certain degree of control effect on Aspergillus Niger, and the reason for this was considered the combined effect of boric acid/borax and UV absorbents.

Preparation and Performance Study of Bamboo Charcoal/Water-borne Polyurethane Functional Coating

Poly(Lactic Acid) Biocomposites Reinforced With Ultrafine Bamboo-Char: Morphology, Mechanical, Thermal, And Water Absorption Properties

Fabrication and properties of polypylene matrix composites reinforced by ultrafine bamboo-char

Fabrication and reinforcement of ternary composites based on polypropylene matrix with bamboo particle/ultrafine bamboo-char

Composites of Polypropylene Reinforced with Ultrafine Bamboo-char: Morphology, Mechanical and Thermal Properties

High-toughness PLA/Bamboo Cellulose Nanowhiskers Bionanocomposite, Strengthened with Silylated Ultrafine Bamboo-Char

Boron-Based Mildew Preventive and Ultraviolet Absorbent Modification of Waterborne Polyurethane Coatings on Laminated Bamboo

Preparation and Performance Study of One-package Water-borne PU Wooden Ware Finish (Ⅱ)

Development of Biodegradable Flame-Retardant Bamboo Charcoal Composites, Part I: Thermal and Elemental Analyses.

Preparation and Properties of a Novel Cross-Linked Network Waterborne Polyurethane for Wood Lacquer

Bamboo charcoal fused with polyurethane foam for efficiently removing organic solvents from wastewater: experimental and simulation

Nanocellulose-Reinforced Polyurethane for Waterborne Wood Coating

Preparation of Plastics- and Foaming Agent-Free and Porous Bamboo Charcoal based Composites Using Sodium Silicate as Adhesives

A novel waterborne polyurethane coating modified by highly dispersed nano‐boron carbide particles

Enhancing the Mechanical Properties of Waterborne Polyurethane Paint by Graphene Oxide for Wood Products

PREPARATION PROCESS AND INTERFACE MODIFICATION ON THE MECHANICAL PROPERTIES OF BAMBOO FIBER/ POLYPROPYLENE CARBONATE COMPOSITES

Effect of different amounts of bamboo charcoal on properties of biodegradable bamboo charcoal/polylactic acid composites

Preparation, mechanical properties of waterborne polyurethane and crosslinked polyurethane‐acrylate composite

Mechanical and Thermal Properties of Waterborne Polyurethane Coating Modified through One-Step Cellulose Nanocrystals/Graphene Materials Sols Method

Characterizations of poly-lactic acid/polypropylene filled with bamboo charcoal powder

STUDY ON THE MOST EFFECTIVE COMBINATION OF FLAME RETARDANT AND ANTI-AGING AGENT FOR BAMBOO MODIFICATION