Abstract:To enhance the cyclic stability and high rate performance of the advanced Lithium-rich and manganese-based layered structure cathode materials, the Li1.20[Mn0.54-x Ni0.13Co0.13Ce x ] O2 (x = 0, 0.01, 0.02, 0.03) were synthesized by partially substituting Mn4+ with different amounts of Ce3+ via the traditional co-precipitation method. The effect of Ce3+ doping on the crystal structure, particles morphology and electrochemical properties of the Li1.20[Mn0.54Co0.13Ni0.13]O2 was studied by X-ray diffraction (XRD), scanning electron microscope (SEM), galvanostatic charge-discharge tests and electrochemical impedance spectroscopy (EIS) measurement. The XRD, SEM and EDS results demonstrated that the cathodes after Ce3+ doping delivered the larger crystal lattice parameters, the lower cation mixing between Ni2+ and Li+ and the smaller size of cathode particles. Therefore, the superior rate capacity and cyclic performance were obtained for the Ce3+ doped cathodes. Particularly, the Li1.20[Mn0.52Ni0.13Co0.13Ce0.02]O2 demonstrated the optimal electrochemical properties, which delivered a high discharge capacity of 136.7 mAhg-1 at 5C high rate and a high capacity retention of 91.2% at 2C rate after 100 cycles. While the pristine cathode only exhibited a discharge capacity of 92.8 mAhg-1 at 5C rate, 43.9 mAhg-1 smaller than that of the Li1.20[Mn0.52Ni0.13Co0.13Ce0.02]O2. In addition, it retained a discharge capacity of 112.3 mAhg-1 with a capacity retention of only 81.5% after 100 cycles at 2C rate. The larger capacity retention and superior rate performance of Ce3+ doped cathodes could be ascribed to the fast Li+ diffusing speed, the high cation ordering and lower charge transfer resistance during cycling.

Study on Electrochemical Properties of Ce-doped LiFePO4 Cathode Materials

Enhanced properties of LiFePO4/C cathode materials modified by CePO4 nanoparticles

Revealing the Ultrahigh Rate Performance of the La and Ce Co-doping LiFePO 4 Composite

Effect of CeO2-coating on the electrochemical performances of LiFePO4/C cathode material

Effect of Cerium Substitution on Structural and Electrochemical Performance of Li[Li0.2Mn0.54Co0.13Ni0.13]O2 Cathode Material for Lithium-Ion Battery

Synthesis and Characterization of LiFePO4 Nanoparticle/Mesoporous Carbon Composites As High-Power Cathode Materials for Lithium-Ion Batteries

Synthesis, characterization and properties of LiFePO4/C cathode material

Influence of Lanthanum Doping on Performance of LiFePO4 Cathode Materials for Lithium-Ion Batteries

Enhanced Electrochemical Performance And Thermal Stability Of A Cepo4-Coated Li1.2ni0.13co0.13mn0.54o2 Cathode Material For Lithium-Ion Batteries

Doping Effects on Electronic Conductivity and Electrochemical Performance of Lifepo4

Enhanced electrochemical performances of cerium-doped Li-Rich Li1.2Ni0.13Co0.13Mn0.54O2 cathode materials

Preparation and characterization of Ti4+-doped LiFePO4 cathode materials for lithium-ion batteries

A novel Cu+-doped Li[Fe0.9Cu0.1Li0.1]PO4/C cathode material with enhanced electrochemical properties

Physical and electrochemical properties of la-doped lithium iron phosphate electrodes

Preparation of CeO2-coated Li1.2Mn0.54Co0.13Ni0.13O2 as cathode materials for Lithium Ion Batteries

Improving the Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathodes Using a Simple Ce4+-doping and CeO2-coating Technique

Physical and electrochemical properties of La-doped lithium iron phosphate

Enhanced Electrochemical Performance of Rare Earth‐Doped Amorphous LiFePO4 Cathodes for Lithium‐Ion Batteries

One-step Solid-state Synthesis and Electrochemical Performance of Nb-doped LiFePO_4/C

Physical and Electrochemical Properties of La doped Lithium Iron Phosphate Electrodes

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries