Abstract:In order to dynamically describe the transition of the scalar dissipation rate of the mixture fraction variance from near-wall regions to mainstream in near-wall combustion, the traditional flamelet/progress variable (FPV) model, which can be used either within the Reynolds Averaged Navier Stokes (RANS) framework or the large-eddy simulation (LES) framework, is modified to form an improved FPV model within the framework of the improved delayed detached eddy simulation (IDDES). The model blends respective expressions of the scalar dissipation rate within the RANS and LES frameworks into a unified form with an employment of the IDDES concept. It also adopts an analogy between the mixture fraction variance and turbulent kinetic energy. A hydrogen-fueled near-wall combustion is simulated to validate this model. Large-scale turbulent structures, which can either locally enhance combustion or cause local extinction in the reacting zone, are reproduced. Due to the blockage to lateral extents of spanwise turbulent structures, a three-dimensional effect, that the low temperature fluid at lower corners of flow passage is forced to move away from sidewalls, is also reproduced. The results show that the improved FPV model can avoid the scalar over-mixing effect of the traditional FPV model by delaying and mitigating the development of the mixture fraction variance at the near-wall regions. Therefore, the starting point of the high temperature zone predicted by the improved FPV model is downstream of that predicted by the traditional FPV model. It is indicated that the improved FPV model tends to delay combustion. This tendency is also demonstrated by the less combustion efficiency in the upstream region predicted by the improved FPV model. As a result, it can generate a moderate growth of the mixing and reacting zone in the longitudinal direction, which therefore improves the predictions of the species concentrations. In contrast, the traditional FPV model thickens the mixing and reacting zone, which is negative to the combustion efficiency in the downstream region. It is implied that a reasonable development of the mixture fraction variance at near-wall regions is essentially required for near-wall combustion simulation using the FPV model within the IDDES framework.

Moving Flame Front Model for Volatile Combustion after Homogeneous Ignition

IMPROVEMENT FOR LOCATING THE FLAME FRONT IN THE MOVING FLAME FRONT (MFF) MODEL

Theoretical comparisons and experimental validation of the moving flame front (MFF) model

Characterization on Ignition and Volatile Combustion of Dispersed Coal Particle Streams: in Situ Diagnostics and Transient Modeling

Extended Application of the Moving Flame Front Model for Combustion of a Carbon Particle with a Finite-Rate Homogenous Reaction

MOVING FLAME FRONT (MFF) MODEL CONSIDERING THE SURFACE REDUCTION OF CARBON PARTICLE

Modeling Droplet Vaporization and Combustion with the Volume of Fluid Method at a Small Reynolds Number

Flamelet modeling of forced ignition and flame propagation in hydrogen-air mixtures

An Improved Flamelet/progress Variable Modeling for Supersonic Combustion

Numerical study of a high-hydrogen micromix model burner using flamelet-generated manifold

Study On The Effect Of Volatile Flame On The Combustion Of A Char Particle

Evaluation of Flamelet/Progress Variable Model for Laminar Pulverized Coal Combustion

Particle Combustion Model Simultaneously Considering A Volatile and Carbon Reaction

Experimental and Numerical Investigations on the Interactions of Volatile Flame and Char Combustion of a Coal Particle

Numerical Investigation of Mixture-Fraction-Based Turbulent Combustion Model in Turbulent Diffusion Flames

An LBM-FDM Coupled Numerical Model for Ignition and Transient Downward Flame Spread over Solid Fuel

A Priori and a Posteriori Studies of a Novel Spray Flamelet Tabulation Methodology Considering Evaporation Effects

A New Flame Sheet Model to Reflect the Influence of the Oxidation of CO on the Combustion of a Carbon Particle

An Integral Model of Opposed Smoldering Combustion Propagation

A Model of Transition from Smoldering to Flaming with Natural Diffusion

Modeling Edge Flame Propagation for Flame Particle Tracking in the Forced Ignition Process of Turbulent Nonpremixed Jet Flame