Abstract:A numerical model for the simulation of the low temperature ignition with the flow, temperature, and species turbulent fluctuations in a high pressure counterflow diffusion flame is developed. In order to model the turbulent fluctuations, both time and space dependent perturbations are introduced. There are two types of perturbations studied in this research. The first one is to perturb the molar fraction of H2O2 to mimic the effect of exhausted gas recirculation and the second one is to perturb the strain rate (G) to model the velocity and temperature fluctuations in the turbulent combustion. In the simulation the perturbation size is fixed at 0.1 cm but the perturbation frequency varies from zero to several thousands hertz. The effects of these perturbations on both low and high temperature ignitions were investigated for uniform and nonuniform fuel and oxidizer boundary temperature cases. The results showed that (1) the H2O2 perturbation for the uniform temperature case causes a non-monotonic decrease of the high temperature ignition delay time with a critical perturbation frequency at which the high temperature ignition delay time is the minimum; this nonmonotonic decrease is due to the acceleration of the low temperature kinetics and the deceleration of the transition from the low to high temperature ignition by the perturbation according to the reaction pathway analyses. (2) The strain rate perturbation for the uniform temperature case causes a non-monotonic increase of the high temperature ignition delay time with a critical perturbation frequency near which the high temperature ignition is dramatically delayed as a result of the susceptibility of the transition from the low to high temperature ignition on the strain rate. (3) The strain rate perturbation for the nonuniform temperature case can introduce the temperature fluctuation and therefore both the low and high temperature ignitions can be either accelerated or decelerated due to the strong dependence of the chemical kinetics on the temperature. The above results are first presented and can shed a light on the understanding of the turbulence/chemistry interaction in the turbulent combustion.

A Model of Transition from Smoldering to Flaming with Natural Diffusion

An Integral Model of Opposed Smoldering Combustion Propagation

Characterization on Ignition and Volatile Combustion of Dispersed Coal Particle Streams: in Situ Diagnostics and Transient Modeling

Transition from Horizontal Smoldering to Flaming Combustion

Smoldering and Spontaneous Transition to Flaming over Horizontal Cellulosic Insulation

Effects of Air and Oxy-Fuel Atmospheres on Flamelet Modeling of Pollutant Formation in Laminar Counterflow Solid Fuel Flames

Computational Smoldering Combustion: Predicting the Roles of Moisture and Inert Contents in Peat Wildfires

A Reduced Multicomponent Diffusion Model

Modeling of Two-Dimensional Natural Downward Smoldering of Peat

A Model for Ceiling Flame Spread

Pyrolysis and Ignition of Wood by Thermal Radiation

Numerical Simulation Model of Laminar Hydrogen/Air Diffusion Flame

Quasi-Steady Diffusion Flame Theory with Variable Specific Heats and Transport Coefficients

A New Flame Sheet Model to Reflect the Influence of the Oxidation of CO on the Combustion of a Carbon Particle

Ignition and Extinction Modeling of Hydrothermal Flames

Numerical study of radiation model and diffusion effects on combustion in porous media

Influence of Ambient Radiation on the Flame Propagation of Solid Fuels

Thermal Ignition-One-Step Modeling of the Transition from Slow Reactions to Ignition

Numerical Simulations of Low Temperature Ignition Chemistry with Flow, Temperature, and Species Fluctuations in High Pressure Counterflow Flames

Approximate Analytical Solutions for Transient Mass Flux and Ignition Time of Solid Combustibles Exposed to Time-Varying Heat Flux

Quantifying oxygen diffusion during thermal degradation of combustible porous media