Failure analysis of shot-piston used in squeeze casting process equipment
Junhong Li,Jue Sun,Shuiping Wan,Yu Sun,Yu Wang
DOI: https://doi.org/10.1016/j.engfailanal.2022.106179
IF: 4
2022-06-01
Engineering Failure Analysis
Abstract:The failure investigation has been conducted on shot-piston used in injection system of squeeze casting equipment to clarify its failure mechanism. The macroscopic morphology of failed shot-piston showed there were many network cracks on its upper-end surface while the cylindrical surface was seriously worn. Further studies were carried out on the two surfaces respectively. Firstly, the shot-piston upper-end surface was sampled. And the crack distribution and depth were observed. Then, the crack micromorphology was investigated by scanning electron microscope (SEM), and the sampling points inside cracks were analyzed by energy dispersive spectrometer (EDS). The results show the shot-piston upper-end surface produces thermal stress cracks due to the high-temperature thermal cycle, and oxidation occurs in the cracks. The same method was also used for the cylindrical surface failure mechanism analysis. Above all, the cylindrical surface was sampled and the wear morphology was measured. Afterward, the material composition of the bulge on the cylinder surface and the micromorphology were confirmed by SEM and EDS. The results demonstrate the main failure forms are abrasive wear and adhesive wear. The inconsistent thermal deformation of the shot-piston and shot sleeve caused changes in the fit clearance and resulted in friction and wear. Simultaneously, the metal solution and oxygen erode the shot-piston matrix through the furrow, accelerating wear and failure. According to the failure mechanism of different surfaces, shot-piston service life can be extended by optimizing the squeeze casting process, controlling the temperature gradient, and selecting the appropriate fit clearance, which has important engineering significance.
engineering, mechanical,materials science, characterization & testing