Abstract:Suspension plasma spray is a promising technology for surface coatings. In this work, a comprehensive numerical model was developed to investigate the multiphase flow of suspension droplets and nanoparticles in direct-current (DC) plasma spraying. A three-dimensional computational model was developed to describe the plasma jet flow fields coupled with the axial injection of suspension droplets in which the zirconia micro- and nanoparticles were dispersed. The suspension droplets were tracked using Lagrangian coordinates, considering particle heating, melting, and evaporation. After evaporation of the solvent surrounding the particle, the nanoparticles were discharged into the plasma flow. In addition to the viscous force exerted by the flow on the micrometer-sized particles, the Brownian force and the Saffman lift force were taken into account. The effects of the noncontinuum on particle momentum transfer and evaporation on heat transfer were also considered. The numerical predictions of gas flow temperature were compared with experimental data and numerical data obtained with a different computational fluid dynamics code. The agreement was reasonable. The trajectories, velocity, and temperature of nanoparticles were calculated, and compared with those of microparticles. The results showed that the Brownian force plays a major role in acceleration and heating of nanoparticles. Compared with the conventional plasma spray process with micrometer-sized feedstock, the nanoparticles in suspension plasma spraying were found to have a wider spatial distribution and higher temperature. The effects of operating parameters, such as the power input to the plasma gas and plasma gas composition, on the gas velocity and temperature were investigated. The parameters that have a significant effect on the heat and momentum transfer to the particles injected in the plasma jet were identified.

Numerical Simulation of Metal and Ceramic Particles in Off-Angle Plasma Spray

Nanoparticles Modeling in Axially Injection Suspension Plasma Spray of Zirconia and Alumina Ceramics

Research Progress on Numerical Simulation of the Deposition and Deformation Behavior of Cold Spray Particles

Dynamic Modeling of Micro- and Nano-Sized Particles Impinging on the Substrate During Suspension Plasma Spraying

Numerical Modeling in Radio Frequency Suspension Plasma Spray of Zirconia Powders

Modeling of Micro- and Nanoparticle Characteristics in DC Suspension Plasma Spray

Influence of Spray Angle on Particle Deposition and Thermal Shock Lifetime of Embedded Micro-Agglomerated Particle Coatings

Numerical Study of Powder Particle Flight Behavior during Gas Detonation Spraying Process

Generic Correlation Of Spray Distance With In-Flight Particle Behavior For Different Kinds Of Materials In Air Plasma Spraying

Prediction of deformation characteristics and critical velocities during cold-spray: A new 3D model

Numerical simulation of nucleation, solidification, and microstructure formation in thermal spraying

Numerical Investigation of Substrate Melting and Deformation During Thermal Spray Coating by SPH Method

Simulation of Coating Formation During Plasma Spraying

Influence of spray angle in cold spray deposition of Ti-6Al-4V coatings on Al6061-T6 substrates

Effects of Atomization Injection on Nanoparticle Processing in Suspension Plasma Spray

Three Dimensional Numerical Analysis of Plasma Spraying Using Supersonic Plasma Gun

Numerical Investigation of In-Flight Behavior of Fe-Based Amorphous Alloy Particles in AC-HVAF Thermal Spray Process

Numerical study of the melting and resolidification of the substrate during the impact of a ceramic droplet in a plasma spraying process

An Advanced Ceramic Coating Buildup Model for Thermal Spray Processes

A numerical study of thermal shrinkage influence on the impact dynamics of alumina droplets thermally sprayed on flat, grit-blasted and laser treated surfaces

Numerical Analysis of High-Velocity Oxygen Fuel Thermal-Spray Process for Fe-Based Amorphous Coatings