A Universal Auto Test Flow Based on Test Core

侯晓辉,陈堃銶,杨清清

DOI: https://doi.org/10.3969/j.issn.1000-3428.2004.04.067

2004-01-01

Abstract:This paper fully utilizes the according functions of software in current operation system, advances a universal auto test flow, the concept of test core and an auto comparison method based on test core. It also brings forward a hierarchical way managing related documents.

What problem does this paper attempt to address?

A Test Automation Solution On Gui Functional Test

zhu xiaochun,zhou bo,li juefeng,gao qiu

DOI: https://doi.org/10.1109/INDIN.2008.4618325

2008-01-01

Abstract:Although it is widely believed that software quality will be improved by the use of automated testing, automation Is still not well-off in industry today. There are quite a few issues of traditional software test automation mode, for example, high cost, knowledge barriers, and management troubles.In the paper, a test automation solution on GUI functional test is proposed. The solution integrates test case generation and selection, test case execution, and test reporting to facilitate testing. It introduces the concept of test driver which is designed to take over the communication between test cases and the execution engine. At last, some enhancements are proposed for future work.
The Algorithm and Implementation of a Universal PCB Testing System

LI Jiang-Bo,PAN Xue-zeng,PING Ling-di

DOI: https://doi.org/10.3969/j.issn.1006-5911.2001.06.013

2001-01-01

Computer Integrated Manufacturing Systems

Abstract:The testing of a PCB (Printed Circuit Board)is very important to produce PCB. It affects the qulity and the cost of PCB. This paper mainly discusses the designing and implementation of PCB testing system, especially the key algorithms in the implementation of netlist generation and testing point auto generation module.
Design of EPA Conformance and Interoperability Test System

田民杰,冯冬芹,应群民,潘丽萍

DOI: https://doi.org/10.3969/j.issn.1000-3428.2010.15.080

2010-01-01

Abstract:Aiming at the opening up problem in the field of industrial control,by analyzing the principles of conformance and interoperability test for field bus,this paper designs and implements an EPA conformance and interoperability test system,and expresses its design ideas in the function,procedures framework and test process.Input specification documents before test are designed.Consistency and interoperability test on the products based on EPA standard with the system verifies the feasibility of the design scheme.
Research and Application of HIL Automatic Test Platform for DCT Control System

Zhixin Chen,Baixue Qu,Ronghui Zhang,Mingyang Sun,Yan Zheng

DOI: https://doi.org/10.3969/j.issn.1000-3703.2017.07.001

2017-01-01

Abstract:The Hardware-In-Loop (HIL) test platform of the Dual Clutch Transmission (DCT) controller was built. In combination of practical program to interpret the automatic test process, and using modular test library to rapidly establish logic test sequence, and by using parameterized design to realize reusing of test sequence, through writing script to realize interaction of Excel and AutomationDesk, which makes the automatic test results more intuitive. In combination of practical example injected with faults, the effect of automatic test was verified, which show that the platform can rapidly and effectively verify DCT control strategy in project development, and improve quality of control software.
An Automatic Testing System for Vehicle's Drive Axis Performance Test

林军,周晓军,陈子辰,陈庆春

DOI: https://doi.org/10.3969/j.issn.1001-2257.2000.04.007

2000-01-01

Abstract:Introduces an new integrated electrohudromechanical and signal processing testing system for vehicle's drive axis performance test. With the test system , automatic braking performance testing will be possible on the condition of vehicle real working simulation during testing. Table and graph of the test demanded by customer are automatically completed.Mechanical property and degree of automation of the system can reach requirement for design in practical operation .
The Design of the Test System of Air Fire Extinguishing Systems and Components

程佳,刘荣,王宣银

DOI: https://doi.org/10.3969/j.issn.1001-3881.2004.10.095

2004-01-01

Abstract:The test system of air fire extinguishing systems and components was designed,which can be used to test the performance of air extinguishing systems,the flowrate characteristics of spray nozzles,the equivalent length and temperature characteristics of components,test and record the transmission speed of extinguishant,oxygen proportion,air pressure and temperature in the simulating fire room.
Automatic Control System for a Torque Converter Static and Cycle Hydraulic Tester

DAI Zhen-yu,XUAN Hai-jun,HONG Wei-rong,WU Rong-ren

DOI: https://doi.org/10.3969/j.issn.1002-2333.2007.07.060

2007-01-01

Abstract:To meet the development of the auto-industry,to facilitate different types of Hydraulic torque converter manufacturing and to test production quality,according to the principle of universal applicability,developing auto-control system of a torque converter static and cycle hydraulic tester based on Delphi.Such as multithreading and database.Simulation of the actual conditions of oil-pressure of the Hydraulic torque converter,testing the deformation of Static pressure-expansion and its Cycle-Endurance for the type of YJH300B-1,and we quite satisfied with the results.
A Model and Implementation of Function Test Automation for Web Applications

LAI Lifeng,LIU Qiang

DOI: https://doi.org/10.3969/j.issn.1000-3428.2006.17.043

2006-01-01

Abstract:Web application has its own characteristics compared with traditional computer application,and puts forwards new problems for software testing.This paper brings forward a framework of testing Web application towards its own characteristics,and the testing flows generated from the framework are standardized,easy operated and extendable.Based on the framework,this paper well researches an implementation technique,and develops an application of function test automation for Web applications.This application is efficient and correct in practice,it can find the fault in the Web application that is tested in time,and it makes regress testing simpler and more convenient.
UI AUTOMATIC FUNCTION TESTING USING GRAPHIC COMPARISON ALGORITHM

Liu Xu,Wang Di,Zhang Yuan,Yang Min

DOI: https://doi.org/10.3969/j.issn.1000-386X.2012.10.034

2012-01-01

Abstract:Android system is widely applied on the mobile terminals.However,for the sake of its openness and the lack of strict specification on its exploration,the application qualities are hard to be guaranteed.Now the application stores can only test the functions of the applications of Android manually due to the invisibility of the unknown functional points of the application.Along with the rapid increase in numbers of the application,fully manual test can no longer meet the testing requirement,and the application stores urgently pursue a kind of automatic validation tool aiming at the unknown applications.For this techniques' gap,we employ the graphic comparison algorithm as the theoretical basis of the applied functional interface recognition,by interface traverse to cover all the points with functions in applications,and design and implement an automatic UI function testing tool.Through automation and parallel execution,the efficiency is improved in condition of ensuring the validity and functional points coverage,therefore the test cost is curtailed as well.Test data shows that the automatic function test using graphic comparison approach is able to achieve 93.6% in function points coverage and 100% correctness.
Automated Testing Solutions for Web Application

FU Ling-li,DAI Jun-qiu,LIU Jin-he

DOI: https://doi.org/10.3969/j.issn.1007-2373.2010.04.017

2010-01-01

Abstract:Software testing must be taken in whole software development cycle,and introducing automated concept in software testing can improve the efficiency of software.Paper builds automated testing categories with open source software tools.Testing process and project progress will be managed by testing automation management system.And keyworddriven tool-Watij,Web application testing framework,will be used in software function testing.At last,tsung is used to test software performance which is an open-source multi-protocol distributed load testing tool.Automated testing cannot completely replace manual testing in software development,and only under the premise of software quality,automated testing is meaningful.
Research on testing framework for Web applications

许蕾,徐宝文

DOI: https://doi.org/10.3321/j.issn:1001-0505.2004.06.008

2004-01-01

Abstract:Based on the analysis for Web application characters and traditional software testing process a series of testing flows, such as testing requirement analysis, test cases generation and selection, testing execution, and testing results analysis and measurement are described and presented. And these testing flows are standardized, easy-operated and extendable. The implementation techniques are also investigated, which include the three-level Web application model, applying the combinational testing strategy to generate test cases, automatically executing the testing by Agent, and realizing the comparison, measurement and feedback for the testing results. Each testing step is then integrated harmoniously and implemented effectively. Thus the framework is suitable for the Internet environment and can guide the Web application testing actively.
Study on Fault-Tolerant Based on Modular Method in the Development of Test and Control System Software

PANG Mao,ZHOU Xiao-jun,HU Hong-wei,MENG Qing-hua

DOI: https://doi.org/10.3969/j.issn.1004-1699.2006.02.066

2006-01-01

Abstract:Software development based on modular method can improve the reuse rate of the code, but the possibility increases that the same faults occur in each system. In order to improve the reliability of software, Fault-tolerant is applied to the development of test and control system software based on modular method. According to the characteristic of these systems, the method of fault-avoiding and fault-tolerant is discussed from four aspects: data, operation, hardware and software. The application in the software of the driving-axle synthesis performance test bed that we developed indicates that it can raise the reuse rate of the code, reduce the development period, and also improve the reliability of the software obviously.
Automated testing system and method

牛伟

2015-12-07

Abstract:The invention discloses an automated testing system and method. The automated testing system comprises at least one test flow client side, a plurality of test kind client sides, a plurality of test equipment client sides, a test flow server, a test kind server and a test equipment server; the test flow client sides are used for receiving and outputting test cases; each test kind client side corresponds to one kind of a test function and is used for managing the corresponding test case according to the test function to output a corresponding test instruction; each test equipment client side corresponds to one kind of the test equipment and is used for outputting a test instruction corresponding to the test equipment; the test flow server is used for transmitting the test cases to the corresponding test kind client sides; the test kind server is used for transmitting the received test instructions to the corresponding test equipment client sides; the test equipment server is used for receiving the test equipment instructions transmitted by the test equipment client sides and controlling the corresponding test equipment to perform corresponding tests according to the test equipment instructions.

Computer Science
An Supporting Tool Based on Design Flowchart

DAI Qing-Han,LI Xuan-Dong,ZHAO Jian-Hua,ZHENG Guo-Liang

2005-01-01

Computer Science

Abstract:The stability of telecom system is especially important. Coding and testing affect the stability of code. Ma- chine-generated code will contain less bugs than manual-typed code, and the former provides convenience for tracing and testing. For the sake of stability, this paper puts forward the concept of Design Flowchart through referencing UML. related theory. This paper also describes the theory and application of auto generating code based on Design Flowchart. The first part of this paper is about the advantage of Design Flowchart in software development. The sec- ond part is about the concept of Design Flowchart. The auto-generated-code algorithm is written in the third part. The forth part describes the tracing and testing. The last part introduces the relative tool. This paper describes how to auto generate code from Design Flowchart in detail and how to trace and test the generated code in simple. This paper also realizes an IDE named AutoCodeGen. Some work can be done in the IDE, sueh as editing flowchart, checking flow- chart, compiling flowchart, compiling code, executing flowchart (executing the compiled code), tracing and testing based on flowchart. In practice, AutoCodeGen is used to generate part of code of TCAP protocol.
A new formal test method for networked software integration testing

Shuai Wang,Yindong Ji,Wei Dong,Shiyuan Yang

DOI: https://doi.org/10.1007/978-3-642-12165-4_37

2010-01-01

Abstract:This paper considers the integration testing for networked software that is built by assembling several distributed components in an interoperable manner. Using the traditional single automata-based test approaches, we suffer from the state combinatorial explosion problem. Moreover, several generated test cases may not be executable. This paper proposed a test method based on the automata net which is the extension of communication automata. The state/transition path (S/T-Path) is defined to describe the execution of the software under test. The test cases are constructed through combining the atomic S/T-Paths and all executable. The test cases are calculated from the local transition structures and the interaction procedure between components, so the state combinatorial explosion problem will not be encountered. The generation of test cases for certain software and the benefits for the problems are discussed. Results show that our method has better properties.
A Path-Oriented Tool Supporting for Testing

邱晓康,李宣东

2004-01-01

Abstract:Software testing is an important method of assuring quality and enhancing reliability and path coverage is an essential criterion for testing adequacy.Since the rigid path-cover testing is infeasible,we select and test some key paths,which outweigh others on affecting the overall quality of the system,to enhance test efficiency and profit.A general statistics-based automated tool aiming at object-oriented software systems was proposed.By static analysis and interpolation on code,this tool offers a diagnosis of statistical data derived from continual executions,which are driven by random test cases,for information of selecting key paths in correctness testing and reliability testing.Primary idea,corresponding algorithms of this tool,and some problems in implementation are exposed.
STUDY AND REALIZATION OF A NEW SOFTWARE AUTOMATED TESTING SYSTEM BASED ON J2EE

Pei Songwen,Yu Qiang,Wu Baifeng

DOI: https://doi.org/10.3969/j.issn.1000-386X.2008.07.049

2008-01-01

Abstract:Software automated testing is becoming a hotspot in computer application research,a new design reflection called automated testing system(ATS) is proposed in this paper.ATS is based on J2EE,as an opened and flexible solving scheme of automatic testing,it can ensure the control of cross-platform and distributed testing system.Firstly,the relative theories of J2EE design and the powerful functions of ATS designed on this theory are briefly introduced,then the architecture of ATS is put forward in detail,finally the typical application of ATS is introduced and analyzed.
Method of Test Case Auto-generation Based on Operational Profile

Wang Junjie,Zhang Bo,Wang Hongyuan,Quan Wei

DOI: https://doi.org/10.16526/j.cnki.11-4762/tp.2008.11.027

2008-01-01

Abstract:Software testing is the valid method that guarantees the quality of the software.The task of software testing is complex and companied with the great workload.Exploring the method of test case generation in high-level efficiency is the researching target.Along with the larger scale of the software the requirement of the target is greater.Software operational profile provides the operational path and its probability,which can instruct the test case generation at all stages of software testing.In the stage of software validation test for the imbedded system,using the information from software operational profile and the generic algorithms,the test cases are evolved into the ones which accord with wide and deep requirerments of the operational path.
Automatically Testing for the Web Application

ZHOU Xiao-Yu,XU Lei,XU Bao-Wen,CHEN Huo-Wang

DOI: https://doi.org/10.3969/j.issn.1002-137X.2005.01.036

2005-01-01

Computer Science

Abstract:The Web application testing is concerned with numerous and complicated testing objects,methods and pro- cesses. In order to improve the testing efficiency,the automatic and intelligent level of the testing execution should be enhanced. So combined with the specialities of the Web appliacations,the necessity and feasibility of the automatic and intelligent execution of the Web application testing are analysised firstly. On the base of the related work,the execut- ing process of the Web application testing is detailedly described and throughly analysised,so as to determine the steps and flows of the testing execution along with the related contents such as the adopted technologies and tools. Further- more,we improve the capture-replay technology and make it suitable for the dynamic characters of Web applications, and adopt the intelligent Agent to realize the monitor,management and exception-handler of the whole testing execu- tion. Finally,the Web application testing can be implemented automatically and intelligently in this way.
Design of integrated automated testing platform based on Selenium and TestNG

Huilin Zhang,Wei Li,Qiuli Tong,Yujiang Liu

DOI: https://doi.org/10.3969/j.issn.1002-4956.2015.09.041

2015-01-01

Abstract:To promote the accumulation and reuse of software testing work ,and guarantee the continuous stability of systems in the process of upgrading ,this article proposes the design of integrated automated test platform based on open source frameworks of Selenium and TestNG ,realizes automated end‐to‐end testing based on GUI for Web application systems ,supports the flexible customization of automated testing tasks ,and realizes the w hole process of automated testing including test scripts maintenance , scheduling execution , scheduling monitoring and report custom setting on the premise of no coding work ,which is beneficial to implementation of integrated automated testing framework .

A Universal Auto Test Flow Based on Test Core

A Test Automation Solution On Gui Functional Test

The Algorithm and Implementation of a Universal PCB Testing System

Design of EPA Conformance and Interoperability Test System

Research and Application of HIL Automatic Test Platform for DCT Control System

An Automatic Testing System for Vehicle's Drive Axis Performance Test

The Design of the Test System of Air Fire Extinguishing Systems and Components

Automatic Control System for a Torque Converter Static and Cycle Hydraulic Tester

A Model and Implementation of Function Test Automation for Web Applications

UI AUTOMATIC FUNCTION TESTING USING GRAPHIC COMPARISON ALGORITHM

Automated Testing Solutions for Web Application

Research on testing framework for Web applications

Study on Fault-Tolerant Based on Modular Method in the Development of Test and Control System Software

Automated testing system and method

An Supporting Tool Based on Design Flowchart

A new formal test method for networked software integration testing

A Path-Oriented Tool Supporting for Testing

STUDY AND REALIZATION OF A NEW SOFTWARE AUTOMATED TESTING SYSTEM BASED ON J2EE

Method of Test Case Auto-generation Based on Operational Profile

Automatically Testing for the Web Application

Design of integrated automated testing platform based on Selenium and TestNG