Abstract:LiZnTi ferrite ceramics with high saturation flux density (Bs), large remanence ratio (Br/Bs) and high saturation magnetization (4πMs) is a vital material for high frequency devices. In the present work, we prepared uniform and compact LiZnTiBi ferrite with large average grain size (>30μm) at 900°C. Firstly, the hybrid materials, including Li2CO3, ZnO, TiO2, Bi2O3 and Fe2O3, were pre-sintered at 850°C at O2 atmosphere. Next, composite additives composited of Li2CO3 and ZnO nanoparticles were added to control grain growth. The influences of the Li2CO3 and nano-ZnO (LZ) on the microstructure and magnetic properties of LiZnTiBi ferrite, especially for grain size, have been analyzed. SEM images demonstrated that moderate LZ additives (x=0.75 wt%) can prevent abnormal grains. Also, the ferrite samples possess compact microstructures. The phenomenon indicated that the LZ additive is a good sintering aid for low-temperature sintering LiZnTiBi ferrites. XRD patterns showed that all samples have a pure spinel phase. The magnetic properties, including Bs, Br/Bs and 4πMs, have weak change when LZ additives were added. However, due to smaller average grain size, the coercivity (Hc) gradually increased. Thus, a low-temperature sintering LiZnTiBi ferrite with high saturation flux density (Bs=311.10 mT), large remanence ratio (Br/Bs=0.86), low coercivity (Hc=244.6 A/m) and high saturation magnetization (Ms=75.40) was obtained when 1.00 wt% LZ additive was added. More important, the LiZnTiBi ferrite possessed uniform average grain. Such a sintering method (i.e., adding composite additive to control abnormal grain) should also promote synthesis of other advanced ceramics for practical applications.

Development of NiZn Ferrite Material with High Bs

High Tc, wide temperature ultrahigh Bs MnZn ferrite material and preparation method

Investigation on the Micro-Structure and Magnetic Properties of LMZBS-Bi2O3 Doped Low-Temperature Sintered NiCuZn Ferrites

MnZn power ferrite with high Bs and low core loss

Development of High Performance NiCuZn Ferrite Material ZL500 with Low Sintering Temperature

Low-temperature-fired NiCuZn ferrites with BBSZ glass

Effects of Fe2+ content in raw materials on Mn–Zn ferrite magnetic properties

Influence of Li&lt;sub&gt;2&lt;/sub&gt;CO&lt;sub&gt;3&lt;/sub&gt; and ZnO Nanoparticle on Microstructure and Magnetic Properties of Low-Temperature Sintering LiZnTiBi Ferrites for High-Frequency Applications

Study on structure, magnetic and dielectric properties of li-Zn ferrite with low ferromagnetic resonance line-width and high saturation magnetization synthesized at low temperature by LTCC

Grain Growth, Densification, and Gyromagnetic Properties of LiZnTi Ferrites with H3BO3-Bi2O3-SiO2-ZnO Glass Addition

Low-Temperature Sintering and Electromagnetic Properties of Ba(Zn1/3nb2/3)O-3/Nicuzn Ferrite Composites

Grain Growth, Densification and Magnetic Properties of Nizn Ferrites with Bi2o3 Additive

Microstructure and Magnetic Properties of Low-Temperature Sintered M-type Hexaferrite BaZn0.6Sn0.6Fe10.8O19 for LTCC Process

Microstructure and magnetic properties of Ni–Zn ferrite ceramics with different Ni2+ contents

High Frequency and High Q Value Z-type Hexaferrite Materials

Study on Structure and Magnetic Properties of Low Temperature Sintered NiCuZn Ferrite Materials

Preparation and Investigation of (ni0.15cu0.25zn0.60)fe1.96o4 Ferrite with Very High Initial Permeability from Self-Propagated Powders

Low Temperature Firing of Li0.43zn0.27ti0.13fe2.17o4 Ferrites with Enhanced Magnetic Properties

Effects of Different Sintering Temperature and Mn Content on Magnetic Properties of NiZn Ferrites

Magnetic Properties of Lithium Zinc Ferrites Synthesized by Microwave Sintered Method

Effect Of Nizn Ferrite Nanoparticles Upon The Structure And Magnetic And Gyromagnetic Properties Of Low-Temperature Processed Liznti Ferrites