An Idea To Detect The Environmental Vibration Source Caused By Urban Rail Traffic
Tao Xiaxin,Chen Xianmai,Shi Lijing,Cui Gaohang,Zheng Xin
2008-01-01
Abstract:The vibration caused by urban rail traffic is mainly from the bump between the steel wheel and rail discontinuity such as Joint. In most studies, the vibration source is modeled as a random vibration at the nearest point from the rail, and the effect on buildings and human beings is calculated by a two dimensional analysis. However it is far away from the fact that the effect is come from many joints along the rail while the wheels move through rapidly. The most difficulty is no one can observe the Pulse clearly even at a very near point from rail, since the mixture of pulses before and after this pulse. The recorded vibration is always the combination of many pulses among which the near the stronger, the farther the weaker. A new idea is presented in this paper, to detect the pulse. The vibration time history at a point is synthesized by a sequence pulses. The shape and triggering time of individual pulse are determined by the distance from the point and the Joint, the encounter of wheel and joint. The latter depends on the given length of rail segment, the length between wheels and the velocity of the train. As examples, the syntheses are compared with some records roughly. The further idea to inverse the pulse from observed vibration is discussed so that the power spectral density (PSD) of urban rail traffic could be obtained. Finally, the compares of PSDs. such as American, German, China, is discussed.